forum

This is not entirely correct. I use Domoticz which uses openzwave, I was upgrading from a Razberry to a UZB1, took a backup in Z-Way using the Razberry but was unable to restore it to the UZB1 because I didn't have a Z-Way license for the UZB1. So basically you can't use the restore function in Z-Wa...

Had to reboot the UZB1 and the above trick worked thankfully.

Dev's really should have already fixed this.

This is ridiculous, I just setup a UZB1 which was out of the box AU, updated the firmware and now its locked to EU and the above trick doesn't change it back to AU.

How can I set my UZB1 back to its original frequency?

I have just observed a Razberry Gen 5 V1 card which was purchased in Australia and set to AU frequency change to the EU frequency upon upgrade to firmware version 5.22. Thought I'd post in case anyone else has the same problem, I was able to change it back to AU using the info from my above posts.

Solved 1) Login: http://ZWAYIP:8083 2) Enable debug mode: http://ZWAYIP:8083/expert/#/network/controller 3) Go to this URL: http://ZWAYIP:8083/JS/Run/zway.ZMEFreqChange(4) You should see "null" response, then check Expert UI and it should look like this: 14.PNG Then disable the debug mode....

I purchased a Razberry V2 card from a local supplier in Australia. The card arrived set to the EU frequency and I can't set it to AU in the expert interface. 13.PNG I tried restoring my Z-Wave network backup from my Razberry V1 card which didn't change it either, I've updated the cards firmware and ...

great solution, I also work it working with bluetooth disabled.

I have about 10 "TKB Philio Z-Wave PIR, Door Window, Light and Temperature Sensor (4 in 1)" sensors. I can add them and they work pretty much perfectly in Z-WAY however the motion sensor never turns off. Everytime I walk in front of a sensor the time updates under "motion", this ...