forum

I sincerely hope that I am not communicating with an employee of Z-wave. "You don't get it"? Because I want a new OS and new Z-wave installation to work with a new Razberry card? This seems unreasonable to you? Thanks for your willingness to engage but "You don't get it" is not c...

The point was to upgrade the hardware to take advantage of the new board's greater power. That's why I spent money on it. The system is otherwise stable, I am not looking to change it just for fun.

The full content of the config.txt file are in my original post: $ cat /boot/config.txt DO NOT EDIT THIS FILE The file you are looking for has moved to /boot/firmware/config.txt dtoverlay=pi3-disable-bt Following your suggestion I changed that to the non-pi3 specific syntax, with the results that I ...

Log entries with only dtoverlay=disable-bt: [2024-04-25 23:39:15.034] [D] [zway] Opened device: /dev/ttyAMA0 [2024-04-25 23:39:15.034] [I] [i/o] Setting port speed to 115200 [2024-04-25 23:39:15.035] [D] [zway] Worker thread successfully created [2024-04-25 23:39:15.035] [D] [zway] Worker thread ent...

Thanks for your response. The /boot/config.txt file already had dtoverlay=pi3-disable-bt so I did not change it. Following your response, I added the line you recommended so my file had dtoverlay=disable-bt dtoverlay=pi3-disable-bt after a restart I saw that /dev/ttyAMA0 now *does* exist, but the z-...

Hi I have installed a new copy of Raspberry OS in a Pi 3 B v 1.2 using rpi-imager. I then added the Razberry board and rebooted, and ran wget -qO - https://storage.z-wave.me/RaspbianInstall | sudo bash I am able to get into the web admin interface, but get this error: "An unexpected error occur...

Thank you for responding. Yes that is over complicated, but I'll take what I can get. I didn't realize a rule can trigger on a scene, will try.

Stuff like this will unfortunately keep non technical people away from this platform.

As far as I can tell, users who do not have admin rights can not add an element which they have access to to their dashboard. This makes the dashboard effectively admin-only, though I can't see any justification for that. If I temporarily make a user admin (s)he can set up a dashboard which then rem...

I would like to have a virtual button which I can use to indicate when I am travelling away from home, and use it to pause my scheduled events like turning on lights and opening window shutters. I thought I could use the dummy device for this, but I can not find a way to make scheduled events condit...

After about two months of everything working smoothly, one of my devices has started mis-behaving. It is a Fibaro Roller Shutter 2, which is set to open and close the shutters on a schedule. The events log shows many entries like: Connection lost to z-wave device ID: 3 Z-Wave device ID is back to li...