hi
my virtual thermostat cannot stand xx.5
only whole numbers 22 23 24 not 22.5 23.5 24.5
I run 3.0.6 on raspberry
cb
virtual thermostat only whole numbers
Re: virtual thermostat only whole numbers
Will check it.
Re: virtual thermostat only whole numbers
Hi
This is not fix jet, I now use 3.1.1
and problem with virtual thermostat is still xx,5 can't be set only whole numbers
This is not fix jet, I now use 3.1.1
and problem with virtual thermostat is still xx,5 can't be set only whole numbers
Re: virtual thermostat only whole numbers
I'll make sure this is fixed in upcoming releases
Re: virtual thermostat only whole numbers
for the time being, you can change it directly in the configuration file
1. stop service:
sudo /etc/init.d/z-way-server stop
2. Open config file:
locations: /opt/z-way-server/automation/storage/configjson[some numbers].json
3. Find section with name of your thermostat, mine is "Bedroom heater") and add "step: 1", also you can change min and max value:
Code: Select all
"ZWayVDev_zway_18-0-67-1": {
"deviceType": "thermostat",
"probeType": "thermostat_set_point",
"metrics": {
"scaleTitle": "°C",
"level": 21,
"min": 10,
"max": 28,
"step": 1,
"icon": "thermostat",
"title": "Bedroom heater",
"isFailed": false,
"modificationTime": 1601801583,
"lastLevel": 21
},
sudo /etc/init.d/z-way-server start