Error Razberry

[domo13]

hello,

I have a problem that appears every minute.

Razberry card is new (20 days)
Z-Way server is working properly
Jeedom I use and it works correctly

There is a recursive error, how to solve this problem?

Thank you in advance

[2014-11-17 07:03:09.260] Error returned from _zway_cc_call_handler(zway, command, controller->id, 0, data[4], &data[5]): Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)
[2014-11-17 07:03:17.840] RECEIVED: ( 01 09 00 04 00 05 03 30 03 FF 38 )
[2014-11-17 07:03:17.841] SENT ACK
[2014-11-17 07:03:17.841] SETDATA devices.5.data.lastReceived = 0 (0x00000000)
[2014-11-17 07:03:17.841] SETDATA devices.5.instances.0.commandClasses.48.data.1.level = True
[2014-11-17 07:03:17.841] SETDATA devices.5.instances.0.commandClasses.48.data.1 = Empty
[2014-11-17 07:03:17.908] RECEIVED: ( 01 09 00 04 00 05 03 20 01 FF 2A )
[2014-11-17 07:03:17.908] SENT ACK
[2014-11-17 07:03:17.908] SETDATA devices.5.data.lastReceived = 0 (0x00000000)
[2014-11-17 07:03:17.909] SETDATA devices.1.instances.0.commandClasses.32.data.srcNodeId = 5 (0x00000005)
[2014-11-17 07:03:17.909] SETDATA devices.1.instances.0.commandClasses.32.data.srcInstanceId = 0 (0x00000000)
[2014-11-17 07:03:17.909] SETDATA devices.1.instances.0.commandClasses.32.data.level = 255 (0x000000ff)
[2014-11-17 07:03:17.909] SETDATA devices.5.instances.0.commandClasses.48.data.1.level = True
[2014-11-17 07:03:17.909] SETDATA devices.5.instances.0.commandClasses.48.data.1 = Empty
[2014-11-17 07:03:17.920] RECEIVED: ( 01 09 00 04 00 05 03 60 0D 01 98 )
[2014-11-17 07:03:17.920] SENT ACK
[2014-11-17 07:03:17.920] SETDATA devices.5.data.lastReceived = 0 (0x00000000)
[2014-11-17 07:03:17.920] Packet CC::MULTI_CHANNEL_CMD_ENCAP_V2 is too short: required at least 5 bytes, got 3
[2014-11-17 07:03:17.920] Error returned from _zway_cc_call_handler(zway, command, controller->id, 0, data[4], &data[5]): Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)

[pofs]

You're probably using it with Fibaro device?

The device itself has a broken firmware, so it sends invalid packet.
The solution is to exclude RaZberry from device's multi-channel associations and add to simple ones instead.

[domo13]

well yes I use Fibaro (FGSS and FGK)
Jeedom is in the group 1,2 and 3

You want me to take the group?
If so, I may not have all the information that goes?
What is the device that has a problem?
thank you