Page 1 of 1

Control Roller Shutter/blind wirelessly with stop command

Posted: 12 Jun 2017 23:28
by infinite.player
Hello there,

I have a Razzberry with a Z-Way Server.
There is a Qubino Flush Shutter ZMNHCD installed to control the blinds via the
android app or with the Fibaro keyfob controller.

There are no switches connected to the Shutter Controller. But now I
need additional Switches in the wall. This should be a general up/down (double) hardware switch which should control the
shutter controller wirelessly (there is no cable connection to the shutter controller).

With a (double) switch controller at the hardware switch side this setup works but only to get the blinds up and down. But I would also like to stop the blinds as well with the hardware switch.

Does anyone had the same problem or have an idea to solve this problem?

Kind regards

Michael

Re: Control Roller Shutter/blind wirelessly with stop command

Posted: 16 Apr 2021 19:00
by SVdHeyden
If the shutter is installed with one toggle switch Up/down you can stop the the shutter as follows:
When pressing the Down button to move the shutter down when you press the button one again the shutter should stop.
other way when you push and keep the switch the move the shutter down for example and leave the button then the shutter should stop.
This how it works at my side