hi
I am beginnger with z-wave and installed Z-way on raspberry Pi 3 with razberry card
but i have error
An unexpected error occurred while initialising the Z-Wave controller data.
Please check
1.) if the controller is plugged in correctly,
2.) that in the app 'Z-Wave Network Access' the right port is entered
(UZB: '/dev/ttyACM0', Box: '/dev/ttyAMA0', UZB-Windows: '\\\\.\\COM3', Z-Stick: '/dev/ttyUSB0', embedded boxes: '/dev/ttyS0' or '/dev/ttyS1')
3.) the app is aktiv. If not you could activate it under Menu > Apps > Activ or add a new one under Menu > Apps > Local.
The Setting 'Expert View' needs to be active under Menu > My Settings
on my raspberry in find /dev/ttyAMA0 b
and the time in my zway is incorrect how to chage it
thanks for help
razberry on raspberry pi 3
razberry on raspberry pi 3
- Attachments
-
- Untitled3.png (108.47 KiB) Viewed 6552 times
-
- z-wave ACM0.png (154.13 KiB) Viewed 6554 times
-
- Untitled2.png (100.58 KiB) Viewed 6554 times
-
- Untitled.png (629.45 KiB) Viewed 6554 times
- Z-Wave Support
- Posts: 353
- Joined: 21 Oct 2016 15:49
Re: razberry on raspberry pi 3
Hello,
How do you have install the zway software and have you deactivate Bluetooth?
Is the red LED on Razberry on or off?
The Time you must set in your raspberry pi.
Best regards
Z-Wave Support
How do you have install the zway software and have you deactivate Bluetooth?
Is the red LED on Razberry on or off?
The Time you must set in your raspberry pi.
Best regards
Z-Wave Support
Re: razberry on raspberry pi 3
hi youZ-Wave Support wrote: ↑16 Aug 2017 15:50Hello,
How do you have install the zway software and have you deactivate Bluetooth?
Is the red LED on Razberry on or off?
The Time you must set in your raspberry pi.
Best regards
Z-Wave Support
I install z-way with razberry.img.zip that i downlload
but i did deactivate Bluetooth yet,
so how deactivate Bluetooth?
thanks you
- Z-Wave Support
- Posts: 353
- Joined: 21 Oct 2016 15:49
Re: razberry on raspberry pi 3
Hello,
Bluetooth and razberry using the same Port.
The simplest variant is install the Z-Way software with command
wget -q -O - razberry.z-wave.me/install | sudo bash
on your pi, then will deactivate this automatically.
Best regards
Z-Wave Support
Bluetooth and razberry using the same Port.
The simplest variant is install the Z-Way software with command
wget -q -O - razberry.z-wave.me/install | sudo bash
on your pi, then will deactivate this automatically.
Best regards
Z-Wave Support
Re: razberry on raspberry pi 3
thanks for your help
I will try again installing with wget -q -O - razberry.z-wave.me/install | sudo bash
I will try again installing with wget -q -O - razberry.z-wave.me/install | sudo bash