wrong routing
Posted: 07 Apr 2018 12:10
Already several times I've seen that z-Way uses strange routes.
Now I've found another extreme case in my message log:
Explanation: Z-Way tries to send routed messages via node 34 (next hop). This can't work, because node 34 is not in the range of Z-Way controller as you can see in the screenshot:
Device 34 was prior situated near Z-Way controller. One week ago I placed it far away on a new place and made a new reorganisation via ExpertUI (many times). To me it looks like Z-Way doesn't remove old, no longer possible routes in such cases.
Node 34 can be switched via WebUI. There must be new routes which are working.
Now I've found another extreme case in my message log:
Code: Select all
[2018-04-07 06:42:37.801] #1 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 06=ON-WZ Aeo -> 18=Aus Fib(B) : 152=Security 0 - 128=Nonce Challenge Response - 0xCF50482AB710AFD3
[2018-04-07 06:42:37.883] #1 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 06=ON-WZ Aeo -> 18=Aus Fib(B) : 152=Security 0 - 128=Nonce Challenge Response - 0xCF50482AB710AFD3
[2018-04-07 06:42:37.964] #1 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 06=ON-WZ Aeo -> 18=Aus Fib(B) : 152=Security 0 - 128=Nonce Challenge Response - 0xCF50482AB710AFD3
[2018-04-07 08:11:22.402] #7 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 06=ON-WZ Aeo -> 04=ON-WZ Sen(B) : 132=Wake Up - 08=Wake Up No More Information
[2018-04-07 08:11:22.427] #7 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 06=ON-WZ Aeo -> 04=ON-WZ Sen(B) : 132=Wake Up - 08=Wake Up No More Information
[2018-04-07 08:11:22.481] #7 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 06=ON-WZ Aeo -> 04=ON-WZ Sen(B) : 132=Wake Up - 08=Wake Up No More Information
[2018-04-07 08:58:21.242] #15 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 33=SigHzg Cyr -> 36=Hzg+EN Qub : 96=Multi Channel - 13=Multi Channel Command Encapsulation - 0x00012502
[2018-04-07 08:58:21.312] #15 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 33=SigHzg Cyr -> 36=Hzg+EN Qub : 96=Multi Channel - 13=Multi Channel Command Encapsulation - 0x00012502
[2018-04-07 08:58:21.352] #15 SCast[r] 01=Z-Way >>0 34=Rep Qub ->1 33=SigHzg Cyr -> 36=Hzg+EN Qub : 96=Multi Channel - 13=Multi Channel Command Encapsulation - 0x00012502
Device 34 was prior situated near Z-Way controller. One week ago I placed it far away on a new place and made a new reorganisation via ExpertUI (many times). To me it looks like Z-Way doesn't remove old, no longer possible routes in such cases.
Node 34 can be switched via WebUI. There must be new routes which are working.