UZB Firmware Update from 5.07 to 5.27 fails

Discussions about Z-Way software and Z-Wave technology in general
Post Reply
schreibubi
Posts: 1
Joined: 29 Apr 2018 17:31

UZB Firmware Update from 5.07 to 5.27 fails

Post by schreibubi » 29 Apr 2018 17:38

Hi all,

I've been trying to upgrade my UZB Stick to the latest firmware using the Z-Wave Expert UI (tried version 2.3.6 and 3.0.0rc). The first few updates up to 5.07 were no problem, but now the firmware upgrade page wants to install 5.27 (it offers 3 different versions of 5.27, I tried the EU version of the non-bridged and bridged variant). Firmware update runs without errors (I also checked the log-file and I see many messages saying it was able to successfully write to the eprom), but I'm still running version 5.07. Even unplugging/replugging the USB stick does not change this behaviour. Any idea what could be the issue?

Thanks a lot,

Joerg

stefxx
Posts: 2
Joined: 19 May 2018 21:58

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by stefxx » 19 May 2018 22:03

Hi, I am having the same issues. I am using 2.37, and after an attempt to upgrade my UZB1 (EU version) from 5.7 to 5.27, all seems fine and the log shows no errors, but the firmware remains 5.7 even after a reboot.

Did you ever find a solution?

iblis
Posts: 9
Joined: 21 Jun 2015 15:44

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by iblis » 22 May 2018 02:18

Exactly the same behaviour here using zway-server 2.3.7 + UZB1 5.07. Please fix this z-wave.me!

Jeppo
Posts: 3
Joined: 12 Feb 2018 09:13

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by Jeppo » 03 Jun 2018 01:00

Same here :(
Latest release on both Win 10 and Raspberry Pi

Jeppo
Posts: 3
Joined: 12 Feb 2018 09:13

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by Jeppo » 04 Jun 2018 00:17

After several tries to update, my controllers Command Class now says
Basic • ApplicationStatus • SwitchBinary • SwitchMultilevel • SceneActivation • ClimateControlSchedule • TransportService • AssociationGroupInformation • DeviceResetLocally • CentralScene • ZWavePlusInfo • MultiChannel • Supervision • ManufacturerSpecific • PowerLevel • InclusionController • NodeNaming • Clock • Association • Version • Time • MultiChannelAssociation • SecurityS2 • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene • Basic • SwitchBinary • SwitchMultilevel • SceneActivation • CentralScene •
Is this normal?

missjocular
Posts: 1
Joined: 15 Jun 2018 17:29

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by missjocular » 15 Jun 2018 17:32

Is there any solution to solve the problem of the topic?
Play madalin stunt cars 2 | geometry dash for free on PC.

stefxx
Posts: 2
Joined: 19 May 2018 21:58

Re: UZB Firmware Update from 5.07 to 5.27 fails

Post by stefxx » 19 Jun 2018 08:34

I am still facing this issue as well... it seems we are being ignored...

Post Reply