Percent instead of Lux - Sensative Strips

Discussions about Z-Way software and Z-Wave technology in general
Post Reply
michap
Posts: 437
Joined: 26 Mar 2013 10:35
Contact:

Percent instead of Lux - Sensative Strips

Post by michap »

Hi,

how can be changed the shown value for light in Lux, as expected by device?

I now get percent - a bit high number ;)
% instead of lux
% instead of lux
Sensative_strips_z-way_light.JPG (12.88 KiB) Viewed 2543 times
In Log I see the right values

Code: Select all

[2018-06-01 15:25:16.905] [D] [zway] SETDATA devices.8.data.lastReceived = 0 (0x00000000)
[2018-06-01 15:25:16.905] [D] [zway] SETDATA devices.8.instances.0.commandClasses.49.data.3.deviceScale = 1 (0x00000001)
[2018-06-01 15:25:16.905] [D] [zway] SETDATA devices.8.instances.0.commandClasses.49.data.3.scale = 1 (0x00000001)
[2018-06-01 15:25:16.910] [D] [zway] SETDATA devices.8.instances.0.commandClasses.49.data.3.scaleString = "Lux"
[2018-06-01 15:25:16.911] [D] [zway] SETDATA devices.8.instances.0.commandClasses.49.data.3.val = 10136.000000
[2018-06-01 15:25:16.911] [D] [zway] SETDATA devices.8.instances.0.commandClasses.49.data.3 = Empty
Any idea?

Using Z-Way 2.3.7

Thanks,
Michael
Post Reply