detect events of device in Z-Way

Discussions about Z-Way software and Z-Wave technology in general
Post Reply
michap
Posts: 319
Joined: 26 Mar 2013 10:35
Contact:

detect events of device in Z-Way

Post by michap » 02 Jun 2018 10:36

Hi,

for Sensative strips Comfort are different events defined for "high temperature alarm" and "low temperature alarm"

So I get finally 3 events:

Code: Select all

SETDATA devices.8.instances.0.commandClasses.113.data.4.event = 6 (0x00000006)
SETDATA devices.8.instances.0.commandClasses.113.data.4.event = 0 (0x00000000)
SETDATA devices.8.instances.0.commandClasses.113.data.4.event = 2 (0x00000002)
Full log as sample

Code: Select all

[2018-06-01 16:32:49.309] [D] [zway] SETDATA devices.8.instances.0.commandClasses.113.data.4.eventParameters = byte[0]
[2018-06-01 16:32:49.312] [D] [zway] SETDATA devices.8.instances.0.commandClasses.113.data.4.event = 6 (0x00000006)
[2018-06-01 16:32:49.318] [D] [zway] SETDATA devices.8.instances.0.commandClasses.113.data.4.eventString = "underheat, unknown location"
[2018-06-01 16:32:49.319] [D] [zway] SETDATA devices.8.instances.0.commandClasses.113.data.4.status = 255 (0x000000ff)
[2018-06-01 16:32:49.321] [D] [zway] SETDATA devices.8.instances.0.commandClasses.113.data.4 = Empty
How can be used this events by user in Z-Way?
Haven't found a way - maybe have missed something .

Any idea?

Thanks!
Michael

Post Reply