UZB Firmware update issue
Posted: 23 Jun 2018 11:11
Hello,
I did a firmware update with Z-Way on Windows 10 / expert mode on my UZB USB stick, from 5.02 to 5.06 (version proposed by the program), after the update, the UZB is no more recognized by Windows, unknow USB device, and didn't map anymore to a COM port.
On Linux I have this status:
[ 2.156754] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[ 2.257641] usb 1-1.4: device descriptor read/64, error -32
[ 2.476807] usb 1-1.4: device descriptor read/64, error -32
[ 2.696751] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[ 2.796786] usb 1-1.4: device descriptor read/64, error -32
[ 3.016786] usb 1-1.4: device descriptor read/64, error -32
[ 3.236812] usb 1-1.4: new full-speed USB device number 6 using dwc_otg
[ 3.426295] usbcore: registered new interface driver brcmfmac
[ 3.676768] usb 1-1.4: device not accepting address 6, error -32
[ 3.777163] usb 1-1.4: new full-speed USB device number 7 using dwc_otg
[ 4.216720] usb 1-1.4: device not accepting address 7, error -32
[ 4.216815] usb 1-1-port4: unable to enumerate USB device
Anyway to recover it ?
I did a firmware update with Z-Way on Windows 10 / expert mode on my UZB USB stick, from 5.02 to 5.06 (version proposed by the program), after the update, the UZB is no more recognized by Windows, unknow USB device, and didn't map anymore to a COM port.
On Linux I have this status:
[ 2.156754] usb 1-1.4: new full-speed USB device number 4 using dwc_otg
[ 2.257641] usb 1-1.4: device descriptor read/64, error -32
[ 2.476807] usb 1-1.4: device descriptor read/64, error -32
[ 2.696751] usb 1-1.4: new full-speed USB device number 5 using dwc_otg
[ 2.796786] usb 1-1.4: device descriptor read/64, error -32
[ 3.016786] usb 1-1.4: device descriptor read/64, error -32
[ 3.236812] usb 1-1.4: new full-speed USB device number 6 using dwc_otg
[ 3.426295] usbcore: registered new interface driver brcmfmac
[ 3.676768] usb 1-1.4: device not accepting address 6, error -32
[ 3.777163] usb 1-1.4: new full-speed USB device number 7 using dwc_otg
[ 4.216720] usb 1-1.4: device not accepting address 7, error -32
[ 4.216815] usb 1-1-port4: unable to enumerate USB device
Anyway to recover it ?