Razberry Image and UZB not working

Discussions about Z-Way software and Z-Wave technology in general
Post Reply
raspi-mech
Posts: 3
Joined: 14 Sep 2018 15:47

Razberry Image and UZB not working

Post by raspi-mech »

Hi all,

I just installed the Razberry Image provided by Z-Wave. The problem is, I can't connect to the internet, which normally should be straight forward. Neither Wifi, nor Ethernet is working.
Then I installed the classic Raspbian Image and after that installed the z-way-server using wget. It worked, but now I can't initialize the Z-Wave UZB Stick...
In the manual it is stated on p.14 I guess, that you have to pass the license key in the ExpertUI (there I'm constantly getting following error message: "Communication or binding error! Please login again or check system connectivity.") in the controller info. But there is no such window for registering or activating the UZB Stick.

Please help, I don't know what to do further...

Thanks in advance
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Razberry Image and UZB not working

Post by PoltoS »

Can you show screenshots and logs? Quite hard to understand your problem
tiimbo
Posts: 2
Joined: 19 Sep 2018 12:40

Re: Razberry Image and UZB not working

Post by tiimbo »

go to apps, click on the cog for zwave network access, change serial port to /dev/ttyACM0, reboot
Post Reply