My name is Dajazzz, and im from Finland.
Despite my efforts to look on the inet, example:
http://forum.z-wave.me/viewtopic.php?f= ... tch#p71843
First i installed Noobs, but this was Stretch version and i assumed my problem would be solved by installing Jessie on my new RPI3 (with original 5.1V power supply and noobs SD card)
but now with Jessie im facing the exact same problem.
I installed it as follows:
Code: Select all
wget -q -O - razberry.z-wave.me/install | sudo bash
Do you accept Z-Wave.Me licence agreement?
Please read it on Z-Wave.Me web site: http://razberry.z-wave.me/docs/ZWAYEULA.pd f
yes/no: yes
z-way-server new installation
Installing additional libraries
Get:1 http://mirrordirector.raspbian.org jessie InRelease [14.9 kB]
Get:2 http://archive.raspberrypi.org jessie InRelease [22.9 kB]
Get:3 http://mirrordirector.raspbian.org jessie/main armhf Packages [9,536 kB]
Get:4 http://archive.raspberrypi.org jessie/main armhf Packages [171 kB]
Get:5 http://archive.raspberrypi.org jessie/ui armhf Packages [58.9 kB]
Ign http://archive.raspberrypi.org jessie/main Translation-en_GB
Ign http://archive.raspberrypi.org jessie/main Translation-en
Ign http://archive.raspberrypi.org jessie/ui Translation-en_GB
Ign http://archive.raspberrypi.org jessie/ui Translation-en
Get:6 http://mirrordirector.raspbian.org jessie/contrib armhf Packages [43.3 kB]
Get:7 http://mirrordirector.raspbian.org jessie/non-free armhf Packages [84.2 kB]
Get:8 http://mirrordirector.raspbian.org jessie/rpi armhf Packages [1,356 B]
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
Ign http://mirrordirector.raspbian.org jessie/main Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Fetched 9,933 kB in 26s (381 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libsigsegv2
Suggested packages:
gawk-doc bsd-mailx mailx
The following NEW packages will be installed:
gawk libsigsegv2 sharutils
The following packages will be upgraded:
libc-ares2 tzdata
2 upgraded, 3 newly installed, 0 to remove and 101 not upgraded.
Need to get 1,035 kB of archives.
After this operation, 2,936 kB of additional disk space will be used.
Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libsigsegv2 armhf 2.10-4 [28.2 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main gawk armhf 1:4.1.1+dfsg-1 [480 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main libc-ares2 armhf 1.10.0-2+deb8u2 [66.7 kB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ jessie/main tzdata all 2017c-0+deb8u1 [232 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ jessie/main sharutils armhf 1:4.14-2 [228 kB]
Fetched 1,035 kB in 6s (169 kB/s)
Reading changelogs... Done
Preconfiguring packages ...
Selecting previously unselected package libsigsegv2:armhf.
(Reading database ... 115401 files and directories currently installed.)
Preparing to unpack .../libsigsegv2_2.10-4_armhf.deb ...
Unpacking libsigsegv2:armhf (2.10-4) ...
Setting up libsigsegv2:armhf (2.10-4) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Selecting previously unselected package gawk.
(Reading database ... 115411 files and directories currently installed.)
Preparing to unpack .../gawk_1%3a4.1.1+dfsg-1_armhf.deb ...
Unpacking gawk (1:4.1.1+dfsg-1) ...
Preparing to unpack .../libc-ares2_1.10.0-2+deb8u2_armhf.deb ...
Unpacking libc-ares2:armhf (1.10.0-2+deb8u2) over (1.10.0-2+deb8u1) ...
Preparing to unpack .../tzdata_2017c-0+deb8u1_all.deb ...
Unpacking tzdata (2017c-0+deb8u1) over (2017b-0+deb8u1) ...
Processing triggers for man-db (2.7.5-1~bpo8+1) ...
Setting up tzdata (2017c-0+deb8u1) ...
Current default time zone: 'Etc/UTC'
Local time is now: Fri Dec 22 12:39:04 UTC 2017.
Universal Time is now: Fri Dec 22 12:39:04 UTC 2017.
Run 'dpkg-reconfigure tzdata' if you wish to change it.
Selecting previously unselected package sharutils.
(Reading database ... 115565 files and directories currently installed.)
Preparing to unpack .../sharutils_1%3a4.14-2_armhf.deb ...
Unpacking sharutils (1:4.14-2) ...
Processing triggers for install-info (5.2.0.dfsg.1-6) ...
Processing triggers for man-db (2.7.5-1~bpo8+1) ...
Setting up gawk (1:4.1.1+dfsg-1) ...
Setting up libc-ares2:armhf (1.10.0-2+deb8u2) ...
Setting up sharutils (1:4.14-2) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Installing additional libraries for HomeKit
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libavahi-client-dev libavahi-common-dev libavahi-compat-libdnssd1 libdbus-1-dev
The following NEW packages will be installed:
libavahi-client-dev libavahi-common-dev libavahi-compat-libdnssd-dev libavahi-compat-libdnssd1 libdbus-1-dev
0 upgraded, 5 newly installed, 0 to remove and 101 not upgraded.
Need to get 402 kB of archives.
After this operation, 1,160 kB of additional disk space will be used.
Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libavahi-compat-libdnssd1 armhf 0.6.31-5 [42.9 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main libavahi-common-dev armhf 0.6.31-5 [61.4 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main libdbus-1-dev armhf 1.8.22-0+deb8u1 [184 kB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ jessie/main libavahi-client-dev armhf 0.6.31-5 [55.4 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ jessie/main libavahi-compat-libdnssd-dev armhf 0.6.31-5 [57.7 kB]
Fetched 402 kB in 6s (67.0 kB/s)
Selecting previously unselected package libavahi-compat-libdnssd1:armhf.
(Reading database ... 115611 files and directories currently installed.)
Preparing to unpack .../libavahi-compat-libdnssd1_0.6.31-5_armhf.deb ...
Unpacking libavahi-compat-libdnssd1:armhf (0.6.31-5) ...
Selecting previously unselected package libavahi-common-dev.
Preparing to unpack .../libavahi-common-dev_0.6.31-5_armhf.deb ...
Unpacking libavahi-common-dev (0.6.31-5) ...
Selecting previously unselected package libdbus-1-dev:armhf.
Preparing to unpack .../libdbus-1-dev_1.8.22-0+deb8u1_armhf.deb ...
Unpacking libdbus-1-dev:armhf (1.8.22-0+deb8u1) ...
Selecting previously unselected package libavahi-client-dev.
Preparing to unpack .../libavahi-client-dev_0.6.31-5_armhf.deb ...
Unpacking libavahi-client-dev (0.6.31-5) ...
Selecting previously unselected package libavahi-compat-libdnssd-dev.
Preparing to unpack .../libavahi-compat-libdnssd-dev_0.6.31-5_armhf.deb ...
Unpacking libavahi-compat-libdnssd-dev (0.6.31-5) ...
Setting up libavahi-compat-libdnssd1:armhf (0.6.31-5) ...
Setting up libavahi-common-dev (0.6.31-5) ...
Setting up libdbus-1-dev:armhf (1.8.22-0+deb8u1) ...
Setting up libavahi-client-dev (0.6.31-5) ...
Setting up libavahi-compat-libdnssd-dev (0.6.31-5) ...
Processing triggers for libc-bin (2.19-18+deb8u10) ...
Making symlinks to libssl.so
Making symlinks to libcrypto.so
Installing libarchive-dev
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
libarchive-dev
0 upgraded, 1 newly installed, 0 to remove and 101 not upgraded.
Need to get 393 kB of archives.
After this operation, 1,082 kB of additional disk space will be used.
Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libarchive-dev armhf 3.1.2-11+deb8u3 [393 kB]
Fetched 393 kB in 0s (621 kB/s)
Selecting previously unselected package libarchive-dev:armhf.
(Reading database ... 115700 files and directories currently installed.)
Preparing to unpack .../libarchive-dev_3.1.2-11+deb8u3_armhf.deb ...
Unpacking libarchive-dev:armhf (3.1.2-11+deb8u3) ...
Processing triggers for man-db (2.7.5-1~bpo8+1) ...
Setting up libarchive-dev:armhf (3.1.2-11+deb8u3) ...
Making link to libarchive.so.12
Getting Z-Way for Raspberry Pi and installing
--2017-12-22 12:39:57-- http://razberry.z-wave.me/z-way-server/z-way-server-RaspberryPiXTools-v2.3.6.tgz
Resolving razberry.z-wave.me (razberry.z-wave.me)... 46.20.244.36
Connecting to razberry.z-wave.me (razberry.z-wave.me)|46.20.244.36|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 19893339 (19M) [application/x-gzip]
Saving to: ‘/tmp/z-way-server-RaspberryPiXTools-v2.3.6.tgz’
/tmp/z-way-server-RaspberryPiXTools-v2. 100%[==============================================================================>] 18.97M 815KB/s in 18s
2017-12-22 12:40:15 (1.03 MB/s) - ‘/tmp/z-way-server-RaspberryPiXTools-v2.3.6.tgz’ saved [19893339/19893339]
Extracting new z-way-server
New version z-way-server installed
Creating Z-Way startup script
Adding z-way-server to autostart
Getting Webif for Raspberry Pi and installing
--2017-12-22 12:40:38-- http://razberry.z-wave.me/webif_raspberry.tar.gz
Resolving razberry.z-wave.me (razberry.z-wave.me)... 46.20.244.36
Connecting to razberry.z-wave.me (razberry.z-wave.me)|46.20.244.36|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 412185 (403K) [application/x-gzip]
Saving to: ‘STDOUT’
- 100%[==============================================================================>] 402.52K 359KB/s in 1.1s
2017-12-22 12:40:41 (359 KB/s) - written to stdout [412185/412185]
First install, getting Remote ID
--2017-12-22 12:40:41-- http://find.zwave.me/zbw_new_user
Resolving find.zwave.me (find.zwave.me)... 46.20.244.72
Connecting to find.zwave.me (find.zwave.me)|46.20.244.72|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/octet-stream]
Saving to: ‘/tmp/zbw_connect_setup.run’
/tmp/zbw_connect_setup.run [ <=> ] 6.09K --.-KB/s in 0s
2017-12-22 12:40:43 (49.9 MB/s) - ‘/tmp/zbw_connect_setup.run’ saved [6240]
Do you want to enable the remote support(y/n)? Remote support NOT enabled
Now you can run zbw_connect with /etc/init.d/zbw_connect start
or simply reboot your system
Your user id: 101655
Your password: ie1UKiePei4g
[ ok ] Starting zbw_connect (via systemctl): zbw_connect.service.
Getting webserver mongoose for Webif
--2017-12-22 12:40:54-- http://razberry.z-wave.me/mongoose.pkg.rPi.tgz
Resolving razberry.z-wave.me (razberry.z-wave.me)... 46.20.244.36
Connecting to razberry.z-wave.me (razberry.z-wave.me)|46.20.244.36|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 44749 (44K) [application/x-gzip]
Saving to: ‘/tmp/mongoose.pkg.rPi.tgz’
/tmp/mongoose.pkg.rPi.tgz 100%[==============================================================================>] 43.70K 144KB/s in 0.3s
2017-12-22 12:40:55 (144 KB/s) - ‘/tmp/mongoose.pkg.rPi.tgz’ saved [44749/44749]
Adding mongoose to autostart
Start mongoose http server
[ ok ] Starting mongoose (via systemctl): mongoose.service.
Raspberry Pi 3 Detected. Disabling Bluetooth
Removed symlink /etc/systemd/system/multi-user.target.wants/hciuart.service.
Adding 'dtoverlay=pi3-miniuart-bt' to /boot/config.txt
!!! Update Raspberry Pi 3 Firmware for stability work with commands:
sudo apt-get install rpi-update
sudo rpi-update
ls: cannot access config/zddx/*.xml: No such file or directory
Usage: ./z-cfg-update <filename>
diff: /etc/inittab: No such file or directory
diff: /tmp/zway_install_inittab: No such file or directory
Preparing AMA0 interface:
removing 'console=ttyAMA0,115200' and 'kgdboc=ttyAMA0,115200 and 'console=serial0,115200' from kernel command line (/boot/cmdline.txt)
removing '*:*:respawn:/sbin/getty ttyAMA0' from /etc/inittab
mv: cannot stat ‘/tmp/zway_install_inittab’: No such file or directory
AMA0 interface reconfigured, please restart Raspberry
Do you want to receive emails with news about RaZberry project?
! Please subscribe again if you did it before 30.03.2013
yes/no: no
Thank you for using RaZberry!
pi@raspberrypi:~ $
It simply does not list the RPI3.
So i cannot continue.
The IP of my RPI3 is 192.168.... and my pc is also in the same network. (192.168.....)
Any help is very much appreciated.
Thx and happy xmas for you all