Problem inclusion POPP Keypad v2.3.6

Discussions about RaZberry - Z-Wave board for Raspberry computer
Post Reply
añep
Posts: 39
Joined: 10 May 2016 13:53

Problem inclusion POPP Keypad v2.3.6

Post by añep » 01 Dec 2017 14:35

Hi,

I've a problem inclusion POPP Keypad into v2.3.6. The inclusion process not finallied never, stop in 95% and device is not included.

Regards.

IgoriokLT
Posts: 64
Joined: 09 Oct 2016 15:24

Re: Problem inclusion POPP Keypad v2.3.6

Post by IgoriokLT » 01 Dec 2017 14:49

Did you try to wake it up? Battery devices fall asleep in 10-15 seconds and you need to wake them to finish inclusion.

añep
Posts: 39
Joined: 10 May 2016 13:53

Re: Problem inclusion POPP Keypad v2.3.6

Post by añep » 02 Dec 2017 18:37

Yes, wake it up and nothing.

Jeppo
Posts: 1
Joined: 12 Feb 2018 09:13

Re: Problem inclusion POPP Keypad v2.3.6

Post by Jeppo » 14 Feb 2018 01:58

Did you fix the problem?
I have 2 of these keypads, and both don't work. They fail at

Code: Select all

[2018-02-13 23:50:03.334] [I] [zway] Adding job: Security, Alarm Get (v3)
[2018-02-13 23:50:03.334] [D] [zway] SENDING (cb 0x60): ( 01 20 00 13 04 19 98 81 EE D9 BD ED 58 87 98 0A 21 17 42 74 AB 01 38 59 38 96 B8 48 7E 6A F3 25 60 D5 )
[2018-02-13 23:50:03.344] [D] [zway] RECEIVED ACK
[2018-02-13 23:50:03.344] [D] [zway] RECEIVED: ( 01 04 01 13 01 E8 )
[2018-02-13 23:50:03.344] [D] [zway] SENT ACK
[2018-02-13 23:50:03.344] [I] [zway] Job 0x13 (Security, Alarm Get (v3)): Response received - transfered to encapsulated jobs
[2018-02-13 23:50:03.344] [D] [zway] Delivered to Z-Wave stack
[2018-02-13 23:50:03.344] [D] [zway] Delivered to Z-Wave stack
[2018-02-13 23:50:03.455] [D] [zway] RECEIVED: ( 01 07 00 13 60 00 00 0B 80 )
[2018-02-13 23:50:03.455] [D] [zway] SENT ACK
[2018-02-13 23:50:03.455] [I] [zway] Job 0x13 (Security, Alarm Get (v3)): Callback received - transfered to encapsulated jobs
[2018-02-13 23:50:03.456] [I] [zway] Job 0x13 (Alarm Get (v3)): Delivered
[2018-02-13 23:50:03.456] [D] [zway] SendData Response with callback 0x60 received: received by recipient
[2018-02-13 23:50:03.456] [D] [zway] Job 0x13 (Alarm Get (v3)): success
[2018-02-13 23:50:03.456] [I] [zway] Waiting for job reply: Alarm Get (v3)
[2018-02-13 23:50:03.456] [I] [zway] Job 0x13 (Security, Alarm Get (v3)): Delivered
[2018-02-13 23:50:03.456] [D] [zway] SendData Response with callback 0x60 received: received by recipient
[2018-02-13 23:50:03.456] [D] [zway] SETDATA devices.4.data.lastSendInternal = **********
[2018-02-13 23:50:03.456] [D] [zway] Job 0x13 (Security, Alarm Get (v3)): success
[2018-02-13 23:50:03.456] [I] [zway] Removing job: Security, Alarm Get (v3)
[2018-02-13 23:50:05.422] [D] [zway] Job 0x13: deleted from queue
[2018-02-13 23:50:05.595] [W] [zway] Reply not received before timeout for job (Alarm Get (v3))

añep
Posts: 39
Joined: 10 May 2016 13:53

Re: Problem inclusion POPP Keypad v2.3.6

Post by añep » 20 Feb 2018 21:16

Jeppo wrote:
14 Feb 2018 01:58
Did you fix the problem?
I have 2 of these keypads, and both don't work. They fail at
Not yet.

Post Reply