I was used to FS20 and I'm pretty new to Z-Wave therefor I apology in advance for every mistake I could have avoided with experience in this subject.
I've linked a Fibaro Motion Sensor (07/05/2014) with my Razberry (March 2014) and its working fine so far except for the Tamper Alarm which simply does not trigger a notification. I'm using the stable version and updated everything of course!
A normal "Motion" works fine but comes along with an error as well:
Code: Select all
[2014-07-17 22:47:01.099] RECEIVED: ( 01 09 00 04 00 03 03 60 0D 01 9E )
[2014-07-17 22:47:01.100] SENT ACK
[2014-07-17 22:47:01.101] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2014-07-17 22:47:01.102] Packet CC::MULTI_CHANNEL_CMD_ENCAP_V2 is too short: required at least 5 bytes, got 3
[2014-07-17 22:47:01.104] Error returned from _zway_cc_call_handler(zway, command, controller->id, 0, data[4], &data[5]): Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)
Code: Select all
[2014-07-17 22:51:10.864] RECEIVED: ( 01 0D 00 04 00 03 07 9C 02 03 00 13 00 00 7C )
[2014-07-17 22:51:10.865] SENT ACK
[2014-07-17 22:51:10.866] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2014-07-17 22:51:10.868] SETDATA devices.3.instances.0.commandClasses.156.data.0.srcId = 3 (0x00000003)
[2014-07-17 22:51:10.869] SETDATA devices.3.instances.0.commandClasses.156.data.0.sensorState = 19 (0x00000013)
[2014-07-17 22:51:10.870] SETDATA devices.3.instances.0.commandClasses.156.data.0.sensorTime = 0 (0x00000000)
[2014-07-17 22:51:10.881] RECEIVED: ( 01 0D 00 04 00 03 07 9C 02 03 00 FF 00 00 90 )
[2014-07-17 22:51:10.882] SENT ACK
[2014-07-17 22:51:10.884] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2014-07-17 22:51:10.885] SETDATA devices.3.instances.0.commandClasses.156.data.0.srcId = 3 (0x00000003)
[2014-07-17 22:51:10.886] SETDATA devices.3.instances.0.commandClasses.156.data.0.sensorState = 255 (0x000000ff)
[2014-07-17 22:51:10.887] SETDATA devices.3.instances.0.commandClasses.156.data.0.sensorTime = 0 (0x00000000)
[2014-07-17 22:51:10.899] RECEIVED: ( 01 0D 00 04 00 03 07 60 0D 02 02 FF 00 00 60 )
[2014-07-17 22:51:10.900] SENT ACK
[2014-07-17 22:51:10.901] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2014-07-17 22:51:10.903] Node 3:0 CC MultiChannel: Received CC 0xff command from instance 2, but it isn't registered, creating it
[2014-07-17 22:51:10.904] Trying to create command for unknown CC 0xff
[2014-07-17 22:51:10.905] Command Class 0xff is not supported (requested for node 3:2)
[2014-07-17 22:51:10.906] Error returned from _zway_cc_call_handler(zway, cmd, node_id, data[3], length - 4, &data[4]): Bad arguments (-1)
[2014-07-17 22:51:11.143] Executing script: api("/v1/devices", { ...
[2014-07-17 22:51:11.148] Executing script: api("/v1/notifications", { ...
[2014-07-17 22:51:11.927] RECEIVED: ( 01 09 00 04 00 03 03 30 03 FF 3E )
[2014-07-17 22:51:11.928] SENT ACK
[2014-07-17 22:51:11.929] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2014-07-17 22:51:11.930] SETDATA devices.3.instances.0.commandClasses.48.data.1.level = True
[2014-07-17 22:51:11.932] SETDATA devices.3.instances.0.commandClasses.48.data.1 = Empty
[2014-07-17 22:51:11.947] RECEIVED: ( 01 09 00 04 00 03 03 20 01 7F AC )
[2014-07-17 22:51:11.948] SENT ACK
[2014-07-17 22:51:11.949] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2014-07-17 22:51:11.950] SETDATA devices.1.instances.0.commandClasses.32.data.srcNodeId = 3 (0x00000003)
[2014-07-17 22:51:11.952] SETDATA devices.1.instances.0.commandClasses.32.data.srcInstanceId = 0 (0x00000000)
[2014-07-17 22:51:11.953] SETDATA devices.1.instances.0.commandClasses.32.data.level = 127 (0x0000007f)
[2014-07-17 22:51:11.954] SETDATA devices.3.instances.0.commandClasses.48.data.1.level = True
[2014-07-17 22:51:11.958] SETDATA devices.3.instances.0.commandClasses.48.data.1 = Empty
[2014-07-17 22:51:11.970] RECEIVED: ( 01 09 00 04 00 03 03 60 0D 01 9E )
[2014-07-17 22:51:11.971] SENT ACK
[2014-07-17 22:51:11.972] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2014-07-17 22:51:11.974] Packet CC::MULTI_CHANNEL_CMD_ENCAP_V2 is too short: required at least 5 bytes, got 3
[2014-07-17 22:51:11.975] Error returned from _zway_cc_call_handler(zway, command, controller->id, 0, data[4], &data[5]): Wrong packet from Z-Wave network or Discovery got bad data (stick communication failed) (-9)
Shouldn't the tamper alarm show up as a Notifcation in the z-way-ha Notification Area?
I've tried to set..
* "TAMPER OPERATING MODES" with the Value 0, 1 and 4.
* "TAMPER ALARM BROADCAST MODE" to 0 since it's enough for the Razberry to know about it.
* "TAMPER SENSITIVITY" to 15 (default)
* "TAMPER ALARM CANELLATION DELAY" to 30 (default)
Did I miss something?