when I finally managed to include my Aeon 6 (gen 5) multisensor (battery driven) I've discovered even more problems. Firstly the sensor never gets to sleep, wireless activity in expert UI says "Device is currently awake" and stays that way all the time. Checking the logs I see a lot of "Got usecure packet...":
Code: Select all
[2016-01-05 18:29:27.061] [D] [zway] RECEIVED: ( 01 08 00 04 00 0A 02 84 07 78 )
[2016-01-05 18:29:27.061] [D] [zway] SENT ACK
[2016-01-05 18:29:27.061] [D] [zway] SETDATA devices.10.data.lastReceived = 0 (0x00000000)
[2016-01-05 18:29:27.062] [W] [zway] Got unsecure packet from device 10, but Command Class 0x84 Wakeup is marked as secure. Ignoring packet.
[2016-01-05 18:30:00.299] [I] [core] --- ZWayVDev_zway_10-0-48-1 performCommand processing: {"0":"update"}
[2016-01-05 18:30:00.300] [D] [zway] Job 0x13 (SensorBinary Get): removing duplicate
[2016-01-05 18:30:00.302] [I] [core] --- ZWayVDev_zway_10-0-49-1 performCommand processing: {"0":"update"}
[2016-01-05 18:30:00.302] [I] [zway] Adding job: SensorMultilevel V5 Get
[2016-01-05 18:30:00.303] [I] [core] --- ZWayVDev_zway_10-0-49-3 performCommand processing: {"0":"update"}
[2016-01-05 18:30:00.303] [D] [zway] Job 0x13 (SensorMultilevel V5 Get): removing duplicate
[2016-01-05 18:30:00.304] [I] [core] --- ZWayVDev_zway_10-0-49-5 performCommand processing: {"0":"update"}
[2016-01-05 18:30:00.304] [I] [zway] Adding job: SensorMultilevel V5 Get
[2016-01-05 18:30:00.305] [I] [core] --- ZWayVDev_zway_10-0-49-27 performCommand processing: {"0":"update"}
[2016-01-05 18:30:00.305] [I] [zway] Adding job: SensorMultilevel V5 Get
[2016-01-05 18:30:00.306] [I] [core] --- ZWayVDev_zway_10-0-113-7-3-A performCommand processing: {"0":"update"}
[2016-01-05 18:30:00.307] [D] [zway] Job 0x13 (Alarm Get (v3)): removing duplicate
[2016-01-05 18:30:00.308] [I] [core] --- ZWayVDev_zway_10-0-113-7-8-A performCommand processing: {"0":"update"}
[2016-01-05 18:30:00.308] [D] [zway] Job 0x13 (Alarm Get (v3)): removing duplicate
I've also tried to do some config changes, and then waking up the sensor, but the changes never get saved.
The job queue looks like:
Code: Select all
n U W S E D Ack Resp Cbk Timeout NodeId Description Progress Buffer
0 W S - - - 0.20 10 SensorBinary Get a 2 30 2 5
0 W S - - - 0.20 10 SensorMultilevel V5 Get a 4 31 4 1 0 5
0 W S - - - 0.20 10 SensorMultilevel V5 Get a 4 31 4 3 8 5
0 W S - - - 0.20 10 SensorMultilevel V5 Get a 4 31 4 5 0 5
0 W S - - - 0.20 10 SensorMultilevel V5 Get a 4 31 4 1b 0 5
1 W - - - 0.20 10 Nonce Get Not delivered to recipient a 2 98 40 5
0 W S - - - 0.20 10 Alarm Get (v3) a 5 71 4 0 7 0 5
1 W - - - 0.20 10 Nonce Report Not delivered to recipient a a 98 80 f0 92 30 56 77 72 20 a0 5
0 S - - - 0.20 10 SensorBinary Get a 2 30 2 5
0 S - - - 0.20 10 SensorMultilevel V5 Get a 4 31 4 1 0 5
0 S - - - 0.20 10 SensorMultilevel V5 Get a 4 31 4 3 8 5
0 S - - - 0.20 10 SensorMultilevel V5 Get a 4 31 4 5 0 5
0 S - - - 0.20 10 SensorMultilevel V5 Get a 4 31 4 1b 0 5
0 S - - - 0.20 10 Alarm Get (v3) a 5 71 4 0 7 0 5
Queue length: 14
Cheers,
Bo