Can't update Firmware

Discussions about RaZberry - Z-Wave board for Raspberry computer
pepeEL
Posts: 36
Joined: 05 Jan 2017 17:48

Re: Can't update Firmware

Post by pepeEL » 10 Jan 2017 22:58

But FW 5.16 RaZberry GPIO probably not working with Domoticz. This info send me some user. Is new release from february will work with Domoticz ?

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Re: Can't update Firmware

Post by PoltoS » 10 Jan 2017 23:09

It was not working at all. Because you forgot to upgrade bootloader first. It will if you don't forget

pepeEL
Posts: 36
Joined: 05 Jan 2017 17:48

Re: Can't update Firmware

Post by pepeEL » 10 Jan 2017 23:11

No no. User who send me this info upgrade bootloader and upgrade FW. And for henot working with domotcz but workingwith zwave.me

pepeEL
Posts: 36
Joined: 05 Jan 2017 17:48

Re: Can't update Firmware

Post by pepeEL » 11 Jan 2017 00:00

PoltoS wrote:
pepeEL wrote:Please explaine me more cleary because i dont understand... and tgen i try prepare file for this users to write to epprom.
This file has 0x1800 zeroes before the f/w. So to make the correct file one need to:
1. Remove first 0x1800 bytes
2. Prepend one byte 0x01
3. Prepend 0x77ff bytes with 0x00

Means the file is:
00 00 00 00 .... 6144 bytes with zeros in total 00 00 XX XX XX ... more data ... XX XX XX
And should become:
00 00 00 00 .... 30719 bytes with zeros in total 00 00 01 XX XX XX ... more data ... XX XX XX
pepeEL wrote:Is any plan to release new stable firmware for Razberry Me GPIO ?
It is even not yet released by Sigma ;) But if you upgrade bootloader and then the f/w, it will work. Better to wait for a release (around Feb)
pepeEL wrote:Tell me also...range on new RaZberry 2 is very better than on my RaZberry 1 ?
IMHO, yes! About twice better
I dont understand how prepare file for USB Razberry.
I must remove all data and replace it with 00 to address 0x1800 ?

Then i dont understand what you mean in point 2. Prepend one byte 0x01 ?

3. And replace data in this one address 0x77ff to data 00 ?

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Re: Can't update Firmware

Post by PoltoS » 11 Jan 2017 00:45

Forget, I'll do myself upon request.

pepeEL
Posts: 36
Joined: 05 Jan 2017 17:48

Re: Can't update Firmware

Post by pepeEL » 11 Jan 2017 01:08

PoltoS wrote:Forget, I'll do myself upon request.
I dont understand ?

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Re: Can't update Firmware

Post by PoltoS » 11 Jan 2017 01:47

If you don't need it, forget about it. I think you don;t need it, right?

pepeEL
Posts: 36
Joined: 05 Jan 2017 17:48

Re: Can't update Firmware

Post by pepeEL » 11 Jan 2017 01:56

Ok

sboui
Posts: 4
Joined: 23 Sep 2018 22:06

Re: Can't update Firmware

Post by sboui » 25 Sep 2018 17:13

Hi Geeks,
I looked for the .bin file (UPD_FIRMWARE_Razberry_from_05_10_to_05_04_.bin ).
I wonder if you can help me.
Thankss a lot.

pepeEL
Posts: 36
Joined: 05 Jan 2017 17:48

Re: Can't update Firmware

Post by pepeEL » 25 Sep 2018 21:18

Hi
You need file bin for external programmer ?

Post Reply