Support for rasperry pi zero-w?

Discussions about RaZberry - Z-Wave board for Raspberry computer
Post Reply
paaland
Posts: 14
Joined: 08 Jun 2017 09:24
Location: Norway

Support for rasperry pi zero-w?

Post by paaland » 08 Jun 2017 09:28

I see that the raspberry pi zero's are not listed as supported hosts. Anyone tried? I though the GPIO layout was the same, so I can't really see why it should not work.

User avatar
PoltoS
Posts: 3739
Joined: 26 Jan 2011 19:36

Re: Support for rasperry pi zero-w?

Post by PoltoS » 08 Jun 2017 14:07

It works perfectly, but the pinout is different.

paaland
Posts: 14
Joined: 08 Jun 2017 09:24
Location: Norway

Re: Support for rasperry pi zero-w?

Post by paaland » 08 Jun 2017 16:42

Can you show the difference? As far as I've found all the raspi's have the same GPIO layout. The zero does not have the connector attached, but that's easily soldered on.

User avatar
PoltoS
Posts: 3739
Joined: 26 Jan 2011 19:36

Re: Support for rasperry pi zero-w?

Post by PoltoS » 09 Jun 2017 00:51

Never tested myself. May be it is same, don't remember. There are now a lot of those "clones" and "variants" like Pi Zero, Banana Pi, Orange Pi,... - all with a bit different GPIO

paaland
Posts: 14
Joined: 08 Jun 2017 09:24
Location: Norway

Re: Support for rasperry pi zero-w?

Post by paaland » 09 Jun 2017 08:25

For those wondering, it works just fine. I soldered on the GPIO pins on the raspi zero w, put the z-wave card on and booted straight off the old sd-card I had used in the raspi 3 before. Came up and worked straight away.

User avatar
PoltoS
Posts: 3739
Joined: 26 Jan 2011 19:36

Re: Support for rasperry pi zero-w?

Post by PoltoS » 09 Jun 2017 09:07

Good to know that!

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 3 guests