Fibaro and zway connect

Discussions about RaZberry - Z-Wave board for Raspberry computer
trunglt
Posts: 9
Joined: 16 Aug 2017 11:53

Fibaro and zway connect

Post by trunglt »

hi you
i'm beginner with z-way me
to day i installed z-wave me on raspberry pi 3
and i try to find Fibaro Double Switch 2 but it have error
I have configured /dev/ttyAMA0 for RaZberry Daughter Card and set fequency is EU but it can't find fibaro swich
so what is my problem and how to fix it?
thanks so much to any help
Attachments
fibaro sw.png
fibaro sw.png (507.99 KiB) Viewed 10982 times
connect.png
connect.png (124.96 KiB) Viewed 10982 times
Untitled.png
Untitled.png (629.45 KiB) Viewed 10982 times
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Fibaro and zway connect

Post by PoltoS »

Show us the log
trunglt
Posts: 9
Joined: 16 Aug 2017 11:53

Re: Fibaro and zway connect

Post by trunglt »

PoltoS wrote:
17 Aug 2017 00:32
Show us the log
that may log : https://drive.google.com/open?id=0BzyRU ... FZKMGtzSXc
im sory bacause I can not upload directly
and the img when i find device
thanks you for your reply
Attachments
Untitled4.png
Untitled4.png (670.25 KiB) Viewed 10966 times
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Fibaro and zway connect

Post by PoltoS »

Nothing strange in the log. RaZberry just don't see anything from your Fibaro Switch.

We have seen this with Fibaro FGS/FGD modules - try to do factory reset according to their manual. And then they should include flowlessly.
trunglt
Posts: 9
Joined: 16 Aug 2017 11:53

Re: Fibaro and zway connect

Post by trunglt »

PoltoS wrote:
19 Aug 2017 17:44
Nothing strange in the log. RaZberry just don't see anything from your Fibaro Switch.

We have seen this with Fibaro FGS/FGD modules - try to do factory reset according to their manual. And then they should include flowlessly.
Hi Polto,
I tried again with razberry daughter card but it not suscess and i try with uzb
but when i inclusion device it have error "z-wave Expert UI error : unable to update data controller : addNote To netwwork [1]" and blue LED is not bright
when i exclusion device- LED is bright
i don't know my uzb work ?
and how to my zwave inclusion device
thanks for your help
Attachments
zwave uzb.png
zwave uzb.png (676.21 KiB) Viewed 10893 times
zwave err2.png
zwave err2.png (697.19 KiB) Viewed 10893 times
zwave err.png
zwave err.png (614.25 KiB) Viewed 10893 times
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Fibaro and zway connect

Post by PoltoS »

Your donlge looks to have no license loaded in it. Check controller info page and license button
trunglt
Posts: 9
Joined: 16 Aug 2017 11:53

Re: Fibaro and zway connect

Post by trunglt »

hi Polto
sorry for my stupid question but i can't find license button and controller info page
and what is license on uzb1 ?
thanks for help
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Fibaro and zway connect

Post by PoltoS »

The license button is under controller info page
trunglt
Posts: 9
Joined: 16 Aug 2017 11:53

Re: Fibaro and zway connect

Post by trunglt »

thanks you so much
I've found license button but I have not found license on uzb1 box
so do i must buy license and I can have it where and how ?
thanks so much
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Fibaro and zway connect

Post by PoltoS »

It can happen that you bought the UZB1 without license. It is cheaper than the one with. You can always buy the license separatelly.
Post Reply