Full interviewed sensative strip disappeared
Posted: 04 Sep 2017 09:37
Hi all,
This is to highlight a new issue on zway system.
A windows/doors sensative strip suddenly started to have an unpredictable behavior: it started to report door as open and closed alternatively. First I excluded it from the rules. Then I perform a call for nif and a reinterview. Now the strip is 100% interviewed and recognized but it is still disappeared from the UI.
What I state is that in the Configjson file there is a strange thing:
The strip seems to be
And what is strange is the following
It seems that this last part has some bad duplicate.
To call back the strip in the UI, can I delete this second part from the file?
Otherwise, how can I do without reinstall strip again (so removing it from the installation location) ?
This is to highlight a new issue on zway system.
A windows/doors sensative strip suddenly started to have an unpredictable behavior: it started to report door as open and closed alternatively. First I excluded it from the rules. Then I perform a call for nif and a reinterview. Now the strip is 100% interviewed and recognized but it is still disappeared from the UI.
What I state is that in the Configjson file there is a strange thing:
The strip seems to be
Code: Select all
"ZWayVDev_zway_58-0-48-1": {
"deviceType": "sensorBinary",
"metrics": {
"probeTitle": "General purpose",
"scaleTitle": "",
"icon": "motion",
"level": "off",
"title": "Living Balc (58.0.48.1)",
"modificationTime": 1496834102,
"lastLevel": "off"
},
"location": 1,
"tags": [],
"permanently_hidden": false,
"creationTime": 1473682586,
"h": 27493264,
"hasHistory": false,
"visibility": true
},
"ZWayVDev_zway_58-0-128": {
"deviceType": "battery",
"metrics": {
"probeTitle": "Battery",
"scaleTitle": "%",
"level": 100,
"icon": "battery",
"title": "Battery (58.0)",
"modificationTime": 1473835095,
"lastLevel": 100
},
"location": 0,
"tags": [],
"permanently_hidden": false,
"creationTime": 1473682587,
"customIcons": {}
},
"ZWayVDev_zway_58-0-113-7-4-A": {
"deviceType": "sensorBinary",
"metrics": {
"icon": "smoke",
"level": "off",
"title": "Living Balc (58.0.113.7.4)"
},
"location": 1,
"tags": [],
"permanently_hidden": false,
"creationTime": 1473682587,
"h": -1299645776,
"hasHistory": false,
"visibility": true
},
"ZWayVDev_zway_58-0-113-6-Door-A": {
"deviceType": "sensorBinary",
"metrics": {
"icon": "door",
"level": "off",
"title": "Living Balc (58.0.113.6.Door)",
"modificationTime": 1502576797,
"lastLevel": "off"
},
"location": 1,
"tags": [],
"permanently_hidden": false,
"creationTime": 1473682587,
"customIcons": {},
"h": 160550491,
"hasHistory": false,
"visibility": true
},
Code: Select all
"ZWayVDev_zway_58-0-38": {
"deviceType": "switchMultilevel",
"metrics": {
"icon": "blinds",
"title": "Blind (58.0)",
"level": 0,
"modificationTime": 1473533671,
"lastLevel": 0
},
"location": 0,
"tags": [],
"permanently_hidden": false,
"creationTime": 1473533178,
"h": 2046953677,
"hasHistory": false,
"visibility": true
},
"ZWayVDev_zway_58-0-37": {
"deviceType": "switchBinary",
"metrics": {
"icon": "switch",
"title": "Switch (58.0)",
"level": "on",
"modificationTime": 1473533178,
"lastLevel": "on"
},
"location": 0,
"tags": [],
"permanently_hidden": false,
"creationTime": 1473533178,
"h": 2046953676,
"hasHistory": false,
"visibility": true
},
To call back the strip in the UI, can I delete this second part from the file?
Otherwise, how can I do without reinstall strip again (so removing it from the installation location) ?