Danfoss Thermostate Error

Discussions about RaZberry - Z-Wave board for Raspberry computer
Post Reply
Wikibear
Posts: 102
Joined: 01 Jul 2016 14:10

Danfoss Thermostate Error

Post by Wikibear »

I have different LC13 from danfoss and they stop working one by one with Error E1 in display itself. Danfoss say: Communication Error. I can't reincluded and after reset there is no chance to include again as a new device. I get E1. Now my question, is that issue comes from Danfoss or is that an error of Razberry that some strange data crash danfoss device... I had to change some of them. A new device will work immediately.

Thanks for help.
Greatings from the noob
Wikibear
Posts: 102
Joined: 01 Jul 2016 14:10

Re: Danfoss Thermostate Error

Post by Wikibear »

No one?
Greatings from the noob
petergebruers
Posts: 255
Joined: 26 Jul 2015 17:29

Re: Danfoss Thermostate Error

Post by petergebruers »

I have heard the rumour that this often happens if your LC-13 has firmware 1.0. Mine are 1.1 and I never have this problem. Exclusion and inclusion might help but I do not know if that is a permanent fix. Sorry I do not have more details...
jarek
Posts: 29
Joined: 09 Oct 2017 11:18

Re: Danfoss Thermostate Error

Post by jarek »

I got Devolo Thermostate (which is in fact modified Danfoss) and after getting E1 I contacted support and the only option was to replace faulty item.
Wikibear
Posts: 102
Joined: 01 Jul 2016 14:10

Re: Danfoss Thermostate Error

Post by Wikibear »

This is the second one... My firmware is 1.01. I have another one and the runs fine with 1.01. The i will contact amazon again... I must replace all in the past... I don't have a clue which one now is not well...
Greatings from the noob
micky1500
Posts: 298
Joined: 07 Feb 2016 16:29
Location: England

Re: Danfoss Thermostate Error

Post by micky1500 »

I have 11 Danfoss Thermostats.
8 still work. But 3 have failed. either E1 or no display at all.
Failure rate is too high.
I guess I will be looking for suitable replacements soon.
Raspi 4 - (Buster - 32 Bit) Zwave Version 4.1.1, Raz 7 Pro, Serial API Version: 07.38
Wikibear
Posts: 102
Joined: 01 Jul 2016 14:10

Re: Danfoss Thermostate Error

Post by Wikibear »

Sounds bad... I get today my new one and this carry a label with SW1.01 MAY2016... before i get a newer one from September 2016 but also SW1.01. I think this one will be running only a few month an then it will be die. But before the other one must die, too. In most cases this seems to be happen if battery runs dry... Maybe this is the issue? Battery dead, Thermostate dead... Sounds bad... I will contact Danfoss i think and ask why they all die.
Greatings from the noob
Post Reply