Z-Way 2.3.7 with "Link to other Z-way controller"

Discussions about RaZberry - Z-Wave board for Raspberry computer
Post Reply
Zixwater
Posts: 35
Joined: 06 Sep 2014 21:31

Z-Way 2.3.7 with "Link to other Z-way controller"

Post by Zixwater »

I am using a RPi 3 with RaZberry v2 with the latest firmware and when Im trying to link to another z-way controller(its a controller located in the garage aprox. 100m away and many concrete walls apart) that runs on a earlier RPI with Razberry v1 with latest firmware. That unit connects through VPN to my local network so they reside on the same network(apart from different subnets that are routed to eachother). When I add the app and configure it no devices are imported/visible on my primary Razberry. Im happy to comply to share any information needed to resolve this =)
User avatar
PoltoS
Posts: 7562
Joined: 26 Jan 2011 19:36

Re: Z-Way 2.3.7 with "Link to other Z-way controller"

Post by PoltoS »

Please check the log.
Zixwater
Posts: 35
Joined: 06 Sep 2014 21:31

Re: Z-Way 2.3.7 with "Link to other Z-way controller"

Post by Zixwater »

This is what I find in /var/log/z-way-server.log:

Code: Select all

[2018-05-09 13:01:11.413] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:11.558] [I] [core] Can not make request: Couldn't resolve host name
[2018-05-09 13:01:12.561] [I] [core] Can not make request: Couldn't resolve host name
[2018-05-09 13:01:13.360] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:13.545] [I] [core] Can not make request: Couldn't resolve host name
[2018-05-09 13:01:13.810] [I] [core] --- Stopping module Link other Z-Way controller
[2018-05-09 13:01:13.814] [I] [core] --- Starting module Link other Z-Way controller
[2018-05-09 13:01:13.834] [I] [core] config_url http://192.168.4.6:8083
[2018-05-09 13:01:15.444] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:16.437] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:18.390] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:18.839] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:20.469] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:21.482] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:22.689] [I] [core] --- Stopping module Link other Z-Way controller
[2018-05-09 13:01:23.415] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:23.872] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:25.369] [I] [core] Instantiating module 13 from class ImportRemoteHA
[2018-05-09 13:01:25.370] [I] [core] --- Starting module Link other Z-Way controller
[2018-05-09 13:01:25.384] [I] [core] config_url http://192.168.4.6:8083
[2018-05-09 13:01:25.493] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:26.506] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:28.441] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:28.899] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:30.389] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:30.522] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:31.531] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:33.478] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:33.926] [I] [core] Can not make request: Timeout was reached
[2018-05-09 13:01:35.414] [I] [core] Can not make request: Timeout was reached
Not really sure what the the "Can not make request:.." is comming from but pausing the app did not make it stop flodding the log. Other than that i could not find anything meaningfull. What type of log entry am I looking for..?
Zixwater
Posts: 35
Joined: 06 Sep 2014 21:31

Re: Z-Way 2.3.7 with "Link to other Z-way controller"

Post by Zixwater »

Adding a screenshot of the configuration of the app.
Attachments
Screenshot of configuration
Screenshot of configuration
zwaylink.PNG (51.73 KiB) Viewed 5470 times
Zixwater
Posts: 35
Joined: 06 Sep 2014 21:31

Re: Z-Way 2.3.7 with "Link to other Z-way controller"

Post by Zixwater »

Please forgive me, the actual VPN tunnel is not functioning. Please ignore this =)
nievox
Posts: 6
Joined: 04 May 2016 19:11

Re: Z-Way 2.3.7 with "Link to other Z-way controller"

Post by nievox »

Hi, in your opinion why from sending command (and execute that is immediately) and change the state we have to attend up to 1 minutes?

There is a way to fix this?

thanks in advance.
Post Reply