Everspring SP814

Discussions about existing Z-Wave device and their usage with Z-Way/Z-Cloud/Z-Box
Post Reply
mcfanda
Posts: 43
Joined: 08 Mar 2013 14:12

Everspring SP814

Post by mcfanda »

The sensor PIR was working fine but the lux was not settable. After some trial and error I re-included the device (as Z-wave PIR senser(US) 300-series as there's not SP814 in the device list). Now interview is not finished and I get lots of error in the log. What may be usefull is this

2013-04-18 12:49:17,462 Z-Wave.INFO Running wakeup handler for node 3
2013-04-18 12:49:17,462 CmdCls.INFO Node 3:0, CC Wakeup: Wakeup notification
2013-04-18 12:49:17,451 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x71
2013-04-18 12:49:17,440 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x07
2013-04-18 12:49:17,430 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x84
2013-04-18 12:49:17,419 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x02
2013-04-18 12:49:17,409 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x03
2013-04-18 12:49:17,398 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x00
2013-04-18 12:49:17,388 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x04
2013-04-18 12:49:17,377 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x00
2013-04-18 12:49:17,367 Z-Wave.ERROR ERROR! Out of frame flow!! Received byte 0x08
2013-04-18 12:49:10,296 Z-Wave.ERROR Callback received, but no corresponding job in queue.


what do I di wrong?
thanks
marcello
mcfanda
Posts: 43
Joined: 08 Mar 2013 14:12

after re-including twice the

Post by mcfanda »

after re-including twice the error disappeared
Post Reply