Recessed Door Sensor gen5 - Aeon Labs

Discussions about existing Z-Wave device and their usage with Z-Way/Z-Cloud/Z-Box
Post Reply
dennisek
Posts: 7
Joined: 26 Dec 2015 21:37

Recessed Door Sensor gen5 - Aeon Labs

Post by dennisek »

Have you support for this dorr sensor Recessed Door Sensor gen5 - Aeon Labs ;)
Sparkacus
Posts: 24
Joined: 26 Nov 2015 16:19

Re: Recessed Door Sensor gen5 - Aeon Labs

Post by Sparkacus »

I believe so.

I do not have one so I cannot say for sure, but the product is listed AOE_ZW089

I'm new to z-wave but from what I've read all devices should be compatible if they adhere to the z-wave standards. Whether that's true or not.. :?
Attachments
Screenshot 2015-12-28 10.01.35.png
Screenshot 2015-12-28 10.01.35.png (134.48 KiB) Viewed 7806 times
dennisek
Posts: 7
Joined: 26 Dec 2015 21:37

Re: Recessed Door Sensor gen5 - Aeon Labs

Post by dennisek »

Sparkacus wrote:I believe so.

I do not have one so I cannot say for sure, but the product is listed AOE_ZW089

I'm new to z-wave but from what I've read all devices should be compatible if they adhere to the z-wave standards. Whether that's true or not.. :?
Thanks but this one works whery good. version2 gen5 dosent work
silverhack
Posts: 46
Joined: 23 May 2016 21:41

Re: Recessed Door Sensor gen5 - Aeon Labs

Post by silverhack »

For anyone else having problems with ver2 of this device, I got mine working correctly after I set parameter 121 to value 272 (4-byte) as per the information here:
https://aeotec.freshdesk.com/support/so ... eshooting-
After setting the parameter (and waking device) I pulled the battery to reset it and now I am getting the correct events.
Post Reply