Hello again,
I noticed another thread for the ZME_RC2 configuration but as the owner didn't report back yet, I didn't want to hijack his thread.
I included my ZME_RC2 Remote and trap event binary buttons are correctly displayed (after first use of them on the remote) and the current status is visualized. With direct association in Z-way I am able to move my window shutters up and down, but only into their respective final positions. Same with if-then-else.
Pressing and holding the remote button for "Dimming" as in the instruction manual does not do a thing. Am I missing something here?
Greetings,
rws
[edit] my apologies, should be in device specific section
[moderator] Moved
ZME_RC2 Dimming / Wind down until released
-
- Posts: 155
- Joined: 02 Jan 2016 01:20
Re: ZME_RC2 Dimming / Wind down until released
Hi there,
association solved the problem, done via expert gui. Took some sweet time to store the config, but it works
Hooray!
rws
association solved the problem, done via expert gui. Took some sweet time to store the config, but it works
Hooray!
rws