Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Discussions about existing Z-Wave device and their usage with Z-Way/Z-Cloud/Z-Box
vga
Posts: 59
Joined: 18 Dec 2014 11:28

Re: Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Post by vga »

Sure, Nº 255 is the unsaved parameter in my sensor configuration too.
maybe my problem has also to do with this topic: https://forum.z-wave.me/viewtopic.php?f ... y+bindings these log outputs i get also with my sensor.
bogr
Posts: 190
Joined: 16 Nov 2015 22:46

Re: Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Post by bogr »

Actually, since the rc7-upgrade, I haven't seen any "Too many bindings" in the log. Maybe it's to early to draw any conclusions yet since the server has only been up for less than 24h, but previously I got the error quite soon after a server restart.

But I still have a job queue that is huge, at the moment 58 entries :evil: :evil: . Do you have problems with lot of entries in the queue?
vga
Posts: 59
Joined: 18 Dec 2014 11:28

Re: Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Post by vga »

this is my job queue:

Code: Select all

[[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Set",null,[24,5,112,4,2,1,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Get",null,[24,3,112,5,2,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Set",null,[24,5,112,4,39,1,10,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Get",null,[24,3,112,5,39,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Set",null,[24,5,112,4,4,1,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Get",null,[24,3,112,5,4,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Set",null,[24,5,112,4,40,1,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Get",null,[24,3,112,5,40,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Set",null,[24,5,112,4,46,1,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Configuration Get",null,[24,3,112,5,46,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],14,"SensorBinary Get",null,[14,6,86,1,48,2,78,85,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],14,"SensorMultilevel V5 Get",null,[14,8,86,1,49,4,1,0,211,182,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],14,"SensorMultilevel V5 Get",null,[14,8,86,1,49,4,3,8,52,220,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],14,"Alarm Sensor Get",null,[14,7,86,1,156,1,0,97,164,5]],[0.20000000298023224,[1,1,0,0,0,1,0,1,0,1,0,0],23,"SensorBinary Get","Not delivered to recipient",[23,2,48,2,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],23,"Alarm Get (v3)",null,[23,5,113,4,0,7,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],23,"SensorMultilevel V5 Get",null,[23,4,49,4,1,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],23,"SensorMultilevel V5 Get",null,[23,4,49,4,3,8,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],23,"SensorMultilevel V5 Get",null,[23,4,49,4,5,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],23,"SensorMultilevel V5 Get",null,[23,4,49,4,27,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"SensorBinary Get",null,[24,2,48,2,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"Alarm Get (v3)",null,[24,5,113,4,0,7,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"SensorMultilevel V5 Get",null,[24,4,49,4,1,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"SensorMultilevel V5 Get",null,[24,4,49,4,3,8,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"SensorMultilevel V5 Get",null,[24,4,49,4,5,0,5]],[0.20000000298023224,[0,1,0,0,0,1,0,1,0,1,0,0],24,"SensorMultilevel V5 Get",null,[24,4,49,4,27,0,5]]]
is this huge?
bogr
Posts: 190
Joined: 16 Nov 2015 22:46

Re: Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Post by bogr »

Hmmm, don't know, looks like you have approx 25 entries? I'm having a bit of a problem reading the format, but I got some tips from pz1 in another thread - Endless problems of jobs stuck in queue. I was hoping for some clarification from the z-way.me team, but nothing.

BTW, I managed to get rid of all "unsaved" parameters. The problem seemed to be that the values were "null", i.e. there was no json data-structure at all for those parameters. So it didn't help if I tried to explicitly set the value like:

Code: Select all

8083/ZWaveAPI/Run/devices[2].instances[0].commandClasses[112].data[202].val.value=0
because getting the data in the first place

Code: Select all

8083/ZWaveAPI/Run/devices[2].instances[0].commandClasses[112].data[202]
just returned null, instead of the json structure.

Then I reset it by setting param 255 to 2 and then back to 1 (which is default according to spec):

Code: Select all

8083/ZWaveAPI/Run/devices[2].instances[0].commandClasses[112].data[255].val.value=2
8083/ZWaveAPI/Run/devices[2].instances[0].commandClasses[112].data[255].val.value=1
which finally got rid of those nasty red messages in config page. So, one small step for makind...but a whole freakin' marathon left...
pz1
Posts: 2053
Joined: 08 Apr 2012 13:44

Re: Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Post by pz1 »

bogr wrote: I was hoping for some clarification from the z-way.me team, but nothing

Me too :(
vga
Posts: 59
Joined: 18 Dec 2014 11:28

Re: Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Post by vga »

Ah, nice tip, thank you!
...btw, i can´t believe it, but yesterday i can´t control any actor, (expect that i played around with changeing some device descriptions for multisensor and Fibaor Dimmer, i didn´t made anything) so i restarted firmware with no success, than i made a reboot of the system and after that, i have no devices anymore in z-way included!? :shock:
now, first i have to reset and include all my devices again! :( :(
pz1
Posts: 2053
Joined: 08 Apr 2012 13:44

Re: Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Post by pz1 »

@vga, did you make a backup in ExpertUI? With restore you can get at least all your devices back (check both boxes on restore) Don't try restore of Smarthome; that is a useless mess at the moment. (They seem to be working on that now)
Since 29-12-2016 I am no longer a moderator for this forum
vga
Posts: 59
Joined: 18 Dec 2014 11:28

Re: Problem: Aeon MultiSensor6 Gen5 - MotionSensor problem!?

Post by vga »

thanks pz1, but through my own fault i didn´t made a backup. :?
So, it is not so bad, since i included 6 actors and 4 sensors, but for the future i will learn from it! ;)
Post Reply