Linear GD00Z-2 and "burglar alarms"

Discussions about existing Z-Wave device and their usage with Z-Way/Z-Cloud/Z-Box
Post Reply
jadedeane
Posts: 35
Joined: 31 Jul 2016 23:14

Linear GD00Z-2 and "burglar alarms"

Post by jadedeane »

Any idea what these might be? Associated with the garage door unit.
Screen Shot 2016-08-07 at 3.53.00 PM.png
Screen Shot 2016-08-07 at 3.53.00 PM.png (69.88 KiB) Viewed 3516 times
CudaNet
Posts: 58
Joined: 10 Jul 2016 22:32

Re: Linear GD00Z-2 and "burglar alarms"

Post by CudaNet »

Hi,

I have a GDZ-001 and as I was playing with the tilt sensor (removed from Garage door). It has a tab that gets depressed when attached, if you remove that sensor it sets an alarm (e.g. tamper sensor). I suspect that's what this is.

CN
Post Reply