I -think- I'm experiencing the same type of problem with my Kiwkset 916 lock and wanted to add some additional information that I discovered through testing.
If I manually turn the lever on the deadbolt, the device reports the status change and I get the notification and the state is correctly updated in SmartHome UI (both in Events and as the element status). This seems to work very well and regularly.
If I use Z-way to lock or unlock the device (using SmartHome UI or the iPhone app) then the device does change state, but the Notification does not happen and the state change is not reported in UI.
However, if I do the same operation in Z-way
again, then the Notification happens. Example: Door is locked, press unlock in UI, wait 4-5 seconds and press unlock again and then the Notification happens and I see the event in UI and the element changes in UI as well.
Here is what I monitored using
sudo tail -f /var/log/z-way-server.log | grep -i core
Lock started in Closed state, and I had to press open twice (4-5 seconds in between presses) for the notification to occur.
Code: Select all
[2017-04-12 19:38:58.525] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:00.444] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:02.980] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:11.573] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"open","1":{}}
[2017-04-12 19:39:19.513] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"open","1":{}}
[2017-04-12 19:39:21.606] [I] [core] Notification: device-info (device-OnOff): {"dev":"Front Door","l":"open"}
[2017-04-12 19:39:21.707] [I] [core] [BaseModule-22] Set lastLevel to open for ZWayVDev_zway_57-0-98 (was close)
[2017-04-12 19:39:28.969] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:33.962] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:38.947] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:41.014] [I] [core] Notification: device-info (device-OnOff): {"dev":"Front Door","l":"close"}
[2017-04-12 19:39:41.053] [I] [core] [BaseModule-22] Set lastLevel to close for ZWayVDev_zway_57-0-98 (was open)
[2017-04-12 19:39:51.164] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:52.641] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:54.021] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:55.844] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}
[2017-04-12 19:39:57.170] [I] [core] --- ZWayVDev_zway_57-0-98 performCommand processing: {"0":"close","1":{}}