[Solved] Aeotec Smart Switch 6 - not showing RGB control

Discussions about existing Z-Wave device and their usage with Z-Way/Z-Cloud/Z-Box
Post Reply
Karsten
Posts: 30
Joined: 09 May 2016 20:06

[Solved] Aeotec Smart Switch 6 - not showing RGB control

Post by Karsten » 09 Feb 2017 12:01

Hi,

have a working Razberry instance (zway version 2.2.4) with an Aeotech Smart Dimmer (AEOEZW099) connected.
With the VDev appearing for Command Class 51 in the smarthome UI I can control the LED indicator ring at the plug.
Works like a charm...

Now I'm preparing a second system for another home (my family's ;) ) and tried implement the same with zway version 2.3.0 and an Aeotech Smart Switch (AEOEZW096), but I don't see the RGB control in the smarthome UI as expected.
In expert UI and via /ZWaveAPI/Data/devices I see the CommandClass 51 is present and I can change color by expert command or http (i.e. /ZWaveAPI/Run/devices[4].instances[0].commandClasses[51].Set(2,255)).
Any ideas why the RGB control is not showing up or how to make this work?
Last edited by Karsten on 10 Feb 2017 22:01, edited 1 time in total.

Karsten
Posts: 30
Joined: 09 May 2016 20:06

[Solved] Re: Aeotec Smart Switch 6 - not showing RGB control

Post by Karsten » 10 Feb 2017 22:00

Solved by German language support via PM.
Functionality seemed to be blocked intentionally because it might break UI somehow.
Workaround was provided to unblock at own risk.
Thanks again to support.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests