Fibaro Door/Window Sensor - Reset tamper

Discussions about existing Z-Wave device and their usage with Z-Way/Z-Cloud/Z-Box
Post Reply
vegardb123
Posts: 5
Joined: 24 Feb 2017 17:18

Fibaro Door/Window Sensor - Reset tamper

Post by vegardb123 »

Hi!

I've got a Window/Door Sensor from Fibaro, and the tamper alarm is constantly in an "ON" state. The alarm is activatet by pushing the button on the back of the sensor.
This isn't a problem when using for example a Fibaro Motion Sensor, because that sensor resets the tamper alarm after a set time.
How can I reset the tamper alarm in the Door/Window sensor without having to remove it from the system and adding it again every time? Is there any script commands I can use?

Thanks!

- Vegard
zuperman
Posts: 11
Joined: 11 Jan 2022 00:16

Re: Fibaro Door/Window Sensor - Reset tamper

Post by zuperman »

Hello Vegard, I am facing the same problem.
Did you find a solution?
Thanks
Erik
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Fibaro Door/Window Sensor - Reset tamper

Post by PoltoS »

Some devices do not reset back the tamper after they are back to normal position.

For such devices, we have a "postfix" with emulateOff. Please check the following example:
https://github.com/Z-Wave-Me/home-autom ... json#L5705

Postfix can be added in Expert Mode (enable Debug mode in Controller Info tab) or push your postfix to this file (we accept Pull Requests!)
Post Reply