Problems interviewing Aeotec Garage door opener gen5 EU

Discussions about existing Z-Wave device and their usage with Z-Way/Z-Cloud/Z-Box
Post Reply
foouser
Posts: 2
Joined: 10 Oct 2017 08:39

Problems interviewing Aeotec Garage door opener gen5 EU

Post by foouser » 10 Oct 2017 08:52

Hi!

I just bought a Aeotec Garage door opener gen5.
I have the Razberry, and I am running version v2.3.6 of z-way with firmware 05.23. I also just reverted z-way to factory settings, and re-excluded/included all devices.
When including/interviewing the device, it stops at 93% each time, it is not able to finish the SwitchBinary interview. The log says the following:

[2017-10-10 07:43:48.330] [zway] Adding job: SwitchBinary Get
[2017-10-10 07:43:48.335] [zway] Node 3:0 CC Security: sending Nonce Get
[2017-10-10 07:43:48.335] [D] [zway] SETDATA devices.3.instances.0.commandClasses.152.data.rNonceAckWait = **********
[2017-10-10 07:43:48.336] [zway] Adding job: Nonce Get
[2017-10-10 07:43:48.336] [D] [zway] SETDATA devices.3.data.lastNonceGet = 4604751 (0x0046434f)
[2017-10-10 07:43:48.346] [D] [zway] SENDING (cb 0x52): ( 01 09 00 13 03 02 98 40 25 52 4B )
[2017-10-10 07:43:48.348] [D] [zway] RECEIVED ACK
[2017-10-10 07:43:48.352] [D] [zway] RECEIVED: ( 01 04 01 13 01 E8 )
[2017-10-10 07:43:48.353] [D] [zway] SENT ACK
[2017-10-10 07:43:48.353] [D] [zway] Delivered to Z-Wave stack
[2017-10-10 07:43:48.378] [D] [zway] RECEIVED: ( 01 18 00 13 52 00 00 02 00 BC 7F 7F 7F 7F 00 00 03 00 00 00 00 03 01 00 00 19 )
[2017-10-10 07:43:48.379] [D] [zway] SENT ACK
[2017-10-10 07:43:48.379] [zway] Job 0x13 (Nonce Get): Delivered
[2017-10-10 07:43:48.380] [D] [zway] SendData Response with callback 0x52 received: received by recipient
[2017-10-10 07:43:48.380] [D] [zway] SETDATA devices.3.data.lastSendInternal = **********
[2017-10-10 07:43:48.381] [D] [zway] Job 0x13 (Nonce Get): success
[2017-10-10 07:43:48.381] [D] [zway] SETDATA devices.3.instances.0.commandClasses.152.data.rNonceAckWait = **********
[2017-10-10 07:43:48.381] [D] [zway] SETDATA devices.3.data.lastNonceGet = 4604756 (0x00464354)
[2017-10-10 07:43:48.381] [zway] Waiting for job reply: Nonce Get
[2017-10-10 07:43:48.389] [D] [zway] RECEIVED: ( 01 12 00 04 00 03 0A 98 80 DE 51 E5 D3 81 99 63 D7 BC 00 51 )
[2017-10-10 07:43:48.389] [D] [zway] SENT ACK
[2017-10-10 07:43:48.390] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2017-10-10 07:43:48.390] [D] [zway] Received reply on job (Nonce Get)
[2017-10-10 07:43:48.390] [D] [zway] SETDATA devices.3.instances.0.commandClasses.152.data.rNonceAckWait = **********
[2017-10-10 07:43:48.391] [D] [zway] SETDATA devices.3.data.lastNonceGet = 4604757 (0x00464355)
[2017-10-10 07:43:48.391] [zway] Node 3:0 CC Security: received Nonce Report
[2017-10-10 07:43:48.391] [D] [zway] SETDATA devices.3.instances.0.commandClasses.152.data.rNonce = **********
[2017-10-10 07:43:48.391] [zway] Node 3:0 CC Security: Sending a secure message
[2017-10-10 07:43:48.391] [zway] Node 3:0 CC Security: sending encrypted packet: SwitchBinary Get
[2017-10-10 07:43:48.392] [D] [zway] SETDATA devices.3.instances.0.commandClasses.152.data.toFollow = False
[2017-10-10 07:43:48.392] [D] [zway] SETDATA devices.3.data.lastNonceGet = Empty
[2017-10-10 07:43:48.393] [zway] Adding job: Security, SwitchBinary Get
[2017-10-10 07:43:48.420] [D] [zway] SENDING (cb 0x53): ( 01 1D 00 13 03 16 98 81 A8 51 B9 00 24 CE 45 A9 94 9B 66 DE 13 42 4A 9C BA 46 79 BC 25 53 C4 )
[2017-10-10 07:43:48.424] [D] [zway] RECEIVED ACK
[2017-10-10 07:43:48.428] [D] [zway] RECEIVED: ( 01 04 01 13 01 E8 )
[2017-10-10 07:43:48.429] [D] [zway] SENT ACK
[2017-10-10 07:43:48.429] [zway] Job 0x13 (Security, SwitchBinary Get): Response received - transfered to encapsulated jobs
[2017-10-10 07:43:48.429] [D] [zway] Delivered to Z-Wave stack
[2017-10-10 07:43:48.429] [D] [zway] Delivered to Z-Wave stack
[2017-10-10 07:43:48.451] [D] [zway] RECEIVED: ( 01 18 00 13 53 00 00 02 00 BC 7F 7F 7F 7F 00 00 03 00 00 00 00 03 01 00 00 18 )
[2017-10-10 07:43:48.452] [D] [zway] SENT ACK
[2017-10-10 07:43:48.452] [I] [zway] Job 0x13 (Security, SwitchBinary Get): Callback received - transfered to encapsulated jobs
[2017-10-10 07:43:48.452] [I] [zway] Job 0x13 (SwitchBinary Get): Delivered
[2017-10-10 07:43:48.452] [D] [zway] SendData Response with callback 0x53 received: received by recipient
[2017-10-10 07:43:48.453] [D] [zway] Job 0x13 (SwitchBinary Get): success
[2017-10-10 07:43:48.453] [I] [zway] Waiting for job reply: SwitchBinary Get
[2017-10-10 07:43:48.453] [I] [zway] Job 0x13 (Security, SwitchBinary Get): Delivered
[2017-10-10 07:43:48.454] [D] [zway] SendData Response with callback 0x53 received: received by recipient
[2017-10-10 07:43:48.454] [D] [zway] SETDATA devices.3.data.lastSendInternal = **********
[2017-10-10 07:43:48.454] [D] [zway] Job 0x13 (Security, SwitchBinary Get): success
[2017-10-10 07:43:48.455] [I] [zway] Removing job: Security, SwitchBinary Get
[2017-10-10 07:43:48.472] [D] [zway] RECEIVED: ( 01 0A 00 04 00 03 02 98 40 BC 00 94 )
[2017-10-10 07:43:48.472] [D] [zway] SENT ACK
[2017-10-10 07:43:48.473] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2017-10-10 07:43:48.473] [I] [zway] Node 3:0 CC Security: sending Nonce Report
[2017-10-10 07:43:48.474] [I] [zway] Adding job: Nonce Report
[2017-10-10 07:43:48.492] [D] [zway] SENDING (cb 0x54): ( 01 11 00 13 03 0A 98 80 77 73 E2 7B E9 14 89 81 25 54 F5 )
[2017-10-10 07:43:48.495] [D] [zway] RECEIVED ACK
[2017-10-10 07:43:48.499] [D] [zway] RECEIVED: ( 01 04 01 13 01 E8 )
[2017-10-10 07:43:48.499] [D] [zway] SENT ACK
[2017-10-10 07:43:48.500] [D] [zway] Delivered to Z-Wave stack
[2017-10-10 07:43:48.523] [D] [zway] RECEIVED: ( 01 18 00 13 54 00 00 02 00 BC 7F 7F 7F 7F 00 00 03 00 00 00 00 03 01 00 00 1F )
[2017-10-10 07:43:48.523] [D] [zway] SENT ACK
[2017-10-10 07:43:48.524] [I] [zway] Job 0x13 (Nonce Report): Delivered
[2017-10-10 07:43:48.525] [D] [zway] SendData Response with callback 0x54 received: received by recipient
[2017-10-10 07:43:48.525] [D] [zway] SETDATA devices.3.data.lastSendInternal = **********
[2017-10-10 07:43:48.525] [D] [zway] Job 0x13 (Nonce Report): success
[2017-10-10 07:43:48.525] [I] [zway] Removing job: Nonce Report
[2017-10-10 07:43:48.543] [D] [zway] RECEIVED: ( 01 1F 00 04 00 03 17 98 81 AC 4D 1B 23 1B A9 8B BD 91 EE E7 7C 77 0F D9 36 66 BD 16 0B 65 BC 00 D8 )
[2017-10-10 07:43:48.544] [D] [zway] SENT ACK
[2017-10-10 07:43:48.544] [D] [zway] SETDATA devices.3.data.lastReceived = 0 (0x00000000)
[2017-10-10 07:43:48.545] [I] [zway] Node 3:0 CC Security: Received a secure message
[2017-10-10 07:43:48.545] [D] [zway] SETDATA devices.3.instances.0.commandClasses.152.data.firstPart = **********
[2017-10-10 07:43:48.545] [I] [zway] Node 3:0 CC Security: passing decrypted packet to application level: [ 25 03 fd ]
[2017-10-10 07:43:48.546] [D] [zway] Received reply on job (SwitchBinary Get)
[2017-10-10 07:43:48.546] [I] [zway] Node 3:0 CC SwitchBinary: invalid value 253
[2017-10-10 07:43:50.591] [D] [zway] Job 0x13: deleted from queue

Any ideas of what can be wrong?

foouser
Posts: 2
Joined: 10 Oct 2017 08:39

Re: Problems interviewing Aeotec Garage door opener gen5 EU

Post by foouser » 10 Oct 2017 19:16

I can answer my own questioon :)
I found out that the value 253 represents state UNKNOWN. After re-pairing and recalibrating the tilt sensor, the interview finished correctly.

Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests