[HowTo] Installation on HummingBoard i2eX

Tips, Tricks and Scripts to enhance your home automation and workaround known device bugs, limitations and incompatibilities
Mirar
Posts: 113
Joined: 19 Oct 2014 16:54
Location: Stockholm

Re: HummingBoard i2eX

Post by Mirar »

Tell how it went. How much faster is the HummingBoard?
Chopper_Rob
Posts: 5
Joined: 07 Jan 2015 00:13

Re: HummingBoard i2eX

Post by Chopper_Rob »

After changing the setting in the gui it worked immediately.
I have now moved my domoticz installation to the hummingboard and it seems to be much quicker. Still have to do some additional testing but everything seems to be working correct.
A small issue is the heatsink on the hummingboard. The heatsink is next to the IO pins and is also heigher then the pins. So the razberry does not fit by default. For the time being i put a couple of wires between the pins on the hummingboard and the razberry module, but i will replace them for something better.
pz1
Posts: 2053
Joined: 08 Apr 2012 13:44

Re: HummingBoard i2eX

Post by pz1 »

Nice work. Could one of you make a step by step description in the Recipes subforum

thanks, moderator
Since 29-12-2016 I am no longer a moderator for this forum
Chopper_Rob
Posts: 5
Joined: 07 Jan 2015 00:13

Re: HummingBoard i2eX

Post by Chopper_Rob »

sure, i was already thinking about doing a new install just to see what the exact changes are that needs to be done. But it might take a while because of the lack of time. :P
Nadhyr
Posts: 4
Joined: 19 Jul 2015 20:01

Re: HummingBoard i2eX

Post by Nadhyr »

@Chopper_Rob

I followed your tutorial to install domoticz on hummingboard i2ex.
I try to install razberry, but i can't installé correctly it.

Did you have another tutorial about this razberry gpio.

I hope you will help me. Thanks un advance.
Nadhyr
Posts: 4
Joined: 19 Jul 2015 20:01

Re: HummingBoard i2eX

Post by Nadhyr »

zoic22 wrote:I find how to solve that :
- systemctl mask serial-getty@ttymxc0.servic
- edit /boot/uEnv.txt and remove reference to ttymxc0 (console=ttymxc0,xxxx)
Hi can you explain me how to make your solution ??
Thanks in advance
Nadhyr
Posts: 4
Joined: 19 Jul 2015 20:01

Re: HummingBoard i2eX

Post by Nadhyr »

Hello everyone. I found a solution to my problem, after a week of crazy research. Many readers but few contributors.
So I wanted to share the solution I found.

My goal is to build a home automation box.

Moderator note: The actual instruction has been moved from here as final solution to the first post of this topic
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: HummingBoard i2eX [Solved, see p2]

Post by PoltoS »

Made the topic sticky and updated the title to let other people easily find the recipe. Thanks for sharing this

Moderator note: This topic has been moved to the Recipes section
Post Reply