Tested with: v2.2.4-rc9
Install from: Online Appstore
Note: For this recipe you only need a running Z-Way(e.g. Razberry module + Pi), and the free or pro version of OpenRemote.
OpenRemoteHelpers is a standard RaZberry module for communication with OpenRemote. Apart from installing the App no further installation is needed on Z-Way nor on OpenRemote. Reading the installation and deployment guide is strongly recommended.!
This specification has last been tested on OpenRemote Pro 1.4.0.
To control devices there are several HTTP commands:
Check the operability of the commands from the browser.
Code: Select all
Turn on the light: http://192.168.0.39:8083/OpenRemote/SwitchBinaryOn/5/0 Request temperature: http://192.168.0.39:8083/OpenRemote/TemperatureLevel/8/0 Dimming light on 50%: http://192.168.0.39:8083/OpenRemote/SwitchMultilevelSet/6/0/50 Learn worked whether the motion sensor: http://192.168.0.39:8083/OpenRemote/SensorBinaryStatus/4/0/1 "on" To set temperature the thermostat 22 degrees: http://192.168.0.39:8083/OpenRemote/ThermostatSet/8/22