I am using Windows 10.
I have installed Arduino IDE 1.6.5 as described.
When I install Z-Uno 2.0.5 or 2.0.6 then the error "CRC doesn't match..." occurs.
Is there a sollution?
[closed] 2.0.5 and 2.0.6. CRC doesn't match
-
- Posts: 3
- Joined: 22 Nov 2016 19:35
[closed] 2.0.5 and 2.0.6. CRC doesn't match
- Attachments
-
- crc.jpg (61.11 KiB) Viewed 6673 times
Re: 2.0.5 and 2.0.6. CRC doesn't match
What is your current (installed) version - and what Update URL you are using?
Michael
Michael
-
- Posts: 201
- Joined: 05 Sep 2016 22:27
Re: 2.0.5 and 2.0.6. CRC doesn't match
Hi,
I had the same issue... I just de-installed Arduino and made a new, clean installation (with the update-URL http://z-uno.z-wave.me/files/z-uno/pack ... index.json URL as described here). Then I was able to install 2.0.6 without that error. It seems that as soon as you try to switch between 2.0.5 and 2.0.6 there is miscalculation of the CRC...
Regards,
Andreas.
I had the same issue... I just de-installed Arduino and made a new, clean installation (with the update-URL http://z-uno.z-wave.me/files/z-uno/pack ... index.json URL as described here). Then I was able to install 2.0.6 without that error. It seems that as soon as you try to switch between 2.0.5 and 2.0.6 there is miscalculation of the CRC...
Regards,
Andreas.
fhem.de - ZWave development support
-
- Posts: 3
- Joined: 22 Nov 2016 19:35
Re: 2.0.5 and 2.0.6. CRC doesn't match
Hi,
I switched off the virus scanner.
I un installed all and even deleted all data in "C:\Users\Ronald\AppData\".
I followed http://z-uno.z-wave.me/install
Still no success.
I have another error see att
Regards,
Ronald
I switched off the virus scanner.
I un installed all and even deleted all data in "C:\Users\Ronald\AppData\".
I followed http://z-uno.z-wave.me/install
Still no success.
I have another error see att
Regards,
Ronald
- Attachments
-
- error.jpg (64.88 KiB) Viewed 6656 times
-
- Posts: 201
- Joined: 05 Sep 2016 22:27
Re: 2.0.5 and 2.0.6. CRC doesn't match
Hi,
that is strange, in the current error message the path contains "//" which is probably the cause of the error, but I have no idea wheres this would come from...
I can try it on my laptop to verify that it still works on my end, but I can't do it before tommorrow evening.
Regards,
Andreas.
that is strange, in the current error message the path contains "//" which is probably the cause of the error, but I have no idea wheres this would come from...
I can try it on my laptop to verify that it still works on my end, but I can't do it before tommorrow evening.
Regards,
Andreas.
fhem.de - ZWave development support
-
- Posts: 3
- Joined: 22 Nov 2016 19:35
Re: 2.0.5 and 2.0.6. CRC doesn't match
Hi Andreas,
at home I repeated the whole procedure again. Now with the target (zuno) connected.
Now it works.
thanks,
Ronald
at home I repeated the whole procedure again. Now with the target (zuno) connected.
Now it works.
thanks,
Ronald