Roadmap for 2.1.4

Discussion about Z-Uno product. Visit http://z-uno.z-wave.me for more details.

Z-Uno features I need first

Poll ended at 13 Apr 2018 16:29

New channel type for RGBW color selection (Color Switch Command Class)
4
7%
New channel type for thermostat (Thermostat Mode and Thermostat Setpoint Command Classes)
11
20%
New channel type for entry control devices: set up user codes and notify about correct pin entered or RFID card scanned (UserCode and EntryControl Command Classes)
5
9%
New channel type for door locks (Door Lock Command Class)
6
11%
Allow Z-Uno accept and handle SensorMultilevel / SensorBinary Reports (allows to make actors that directly uses sensors reports in their logic)
10
18%
Add more code space (up to 8k) in the S2 version.
2
4%
Fix ADC (currently channels to interfere https://forum.z-wave.me/viewtopic.php?f=3427&t=25646)
6
11%
Allow custom ProductID/ProductTypeID to use different templates for each Z-Uno you own (this includes custom user defined values and autogenerated based on channel types).
7
13%
Allow upload file content to the user NVM space and download it back right from the command line tool (to upload/download fonts, event logs, settings)
4
7%
 
Total votes: 55

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Roadmap for 2.1.4

Post by PoltoS » 14 Mar 2018 16:29

Dear Z-Uno users. We thank you for your persistant interest in Z-Uno project. We have huge plans for future, but this time we decided to ask you what do you think would be nice for the next version.

Please vote for all features you would like us to do in the next 2.1.4 or 2.1.5.

Tillsy
Posts: 28
Joined: 15 Feb 2018 03:51

Re: Roadmap for 2.1.4

Post by Tillsy » 15 Mar 2018 06:48

Oh wow, did not realise the door lock and PIN types were not available - my next project in coming weeks was to begin making my own door lock system. Voted!

Junaid_224
Posts: 3
Joined: 15 Mar 2018 11:58

Re: Roadmap for 2.1.4

Post by Junaid_224 » 09 Apr 2018 12:11

please make the other interrupt also wake up when there is some sensor attached to the pin, ALSO give some example related to interrupt and go back to sleep after any interrupt occur. because I am having an issue and couldn't find anything until yet.

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Re: Roadmap for 2.1.4

Post by PoltoS » 10 Apr 2018 02:37

Only INT1 or keypad scanner can wake up Z-Uno. This is a Z-Wave chip limitation.

What kind of example do you need?

aleconakad
Posts: 18
Joined: 18 Jan 2016 15:25

Re: Roadmap for 2.1.4

Post by aleconakad » 24 May 2018 11:16

Hi,

is there any release schedule for 2.1.4?

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Re: Roadmap for 2.1.4

Post by PoltoS » 24 May 2018 16:35

Next week a beta will be published

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Re: Roadmap for 2.1.4

Post by PoltoS » 24 May 2018 16:36

It will include Thermostat, Color Switch, Door Lock, Reports handling, Allow custom ProductID/ProductTypeID, fix of ADC

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Re: Roadmap for 2.1.4

Post by PoltoS » 02 Jun 2018 19:28

Good news for all of you: 2.1.4 is out for beta: https://forum.z-wave.me/viewtopic.php?f ... 85&p=76485

We have made everything in the list we announced above except for:
  • New channel type for entry control devices: set up user codes and notify about correct pin entered or RFID card scanned (UserCode and EntryControl Command Classes)
  • Add more code space (up to 8k) in the S2 version.
  • Allow custom ProductID/ProductTypeID to use different templates for each Z-Uno you own (this includes custom user defined values and autogenerated based on channel types).
  • Allow upload file content to the user NVM space and download it back right from the command line tool (to upload/download fonts, event logs, settings)
Those improvements are moving to 2.1.5 or 2.1.6

aleconakad
Posts: 18
Joined: 18 Jan 2016 15:25

Re: Roadmap for 2.1.4

Post by aleconakad » 05 Jun 2018 17:06

I would really have liked this feature included since I have multiple Z-Uno devices to include in my openhab zwave network:
Allow custom ProductID/ProductTypeID to use different templates for each Z-Uno you own (this includes custom user defined values and autogenerated based on channel types).

Is it complicated to implement this feature?

Greetings
Alex

User avatar
PoltoS
Posts: 4334
Joined: 26 Jan 2011 19:36

Re: Roadmap for 2.1.4

Post by PoltoS » 07 Jun 2018 00:29

As mentioned, it is almost done, but we decided to deploy it in next release since we need to improve it. We know that many customers do need this

Post Reply