Hi, I saw that you released again just an hour ago. So we should use the actual 2.3.7 relaease.....yes?
Edit: Just realized that the raspberry sw is missing. So let´s wait
v.2.3.7 is out!
- Z-Wave Support
- Posts: 353
- Joined: 21 Oct 2016 15:49
Re: v.2.3.7 is out!
Hello,
The problem has been solved. If you have already installed the update, please install version 2.3.6 and run the update again.
best regards
Z-Wave Support
The problem has been solved. If you have already installed the update, please install version 2.3.6 and run the update again.
best regards
Z-Wave Support
Re: v.2.3.7 is out!
Works. Luckily I didn´t realize the bug
Re: v.2.3.7 is out!
Hmm I'm sure we've fixed the JobQueue issue that we've found during investigating your report. We've tested it also against bigger amount of jobs in the queue
- more than 200 entries per request
- request is polled every second
But I use an RPi3 maybe that makes the difference ...
What happens if you gave it some time? will it appear after a while? Can you send me a screenshot of Chrome's network traffic (dev tools)?
Because of Route Map - it could help to remove old rssi values.
try the following steps to remove it with help of the console:
- $ sudo /etc/init.d/z-way-server stop
- $ sudo rm /opt/z-way-server/automation/storage/zwayrssidatajson-6a4d7718ba0008352ccfcf6f808efb27.json
- $ sudo /etc/init.d/z-way-server start
BR
ronie
Re: v.2.3.7 is out!
Hello!
I istalled 2.3.7 an my raspberry today. (update from 2.3.6) Until now it seems to work.
I tried to add a mobile device, but this was not possible.
I installed the IOS App (Iphone 6, IOS 11.2.6). After starting the APP I tried to scan the QR code, but everytime the QR code came into the camera window the app crashed.
If I set up the app manually, the app works, but I don´t find any new elements in the z-way web-interface for the mobile device.
Also in the Z-Way App "Mobile App Support" no mobile device is listed.
How to "connect" the mobile device to Z-Way?
Regards
I istalled 2.3.7 an my raspberry today. (update from 2.3.6) Until now it seems to work.
I tried to add a mobile device, but this was not possible.
I installed the IOS App (Iphone 6, IOS 11.2.6). After starting the APP I tried to scan the QR code, but everytime the QR code came into the camera window the app crashed.
If I set up the app manually, the app works, but I don´t find any new elements in the z-way web-interface for the mobile device.
Also in the Z-Way App "Mobile App Support" no mobile device is listed.
How to "connect" the mobile device to Z-Way?
Regards
Re: v.2.3.7 is out!
I updated to 2.3.7. Everything seems to work
But I noticed one thing in expert gui: The "Select Device Description" list is empty...
But I noticed one thing in expert gui: The "Select Device Description" list is empty...
Re: v.2.3.7 is out!
Hi aLiEnHeAd,
have you wait a bit after opening the popup and click on the drop down icon?
List is long so the indexing takes a while.
BR
ronie
have you wait a bit after opening the popup and click on the drop down icon?
List is long so the indexing takes a while.
BR
ronie
Re: v.2.3.7 is out!
Hi Ronie,
I tried the suggestions for RouteMap and JobQueue.
Sadly still not working for me.
I have sent screenshots to your info(at)z.wave.me mailbox
Regards
Micky
I tried the suggestions for RouteMap and JobQueue.
Sadly still not working for me.
I have sent screenshots to your info(at)z.wave.me mailbox
Regards
Micky
Raspi 4 - (Buster - 32 Bit) Zwave Version 4.1.1, Raz 7 Pro, Serial API Version: 07.38
Re: v.2.3.7 is out!
As already reported in the German forum:
I experienced with this new update with Philio Roller Shutter Pan08 that in the regular interface you can no longer access binary switches (they are no longer available in the interface, so all scenes, schedules that used to have binary switches of PAN08 are now empty and no longer functional). So you cannot simply turn off/turn on the roller shutters to completely open or close them.
Roller shutters can be multi switched to 0% or 100% instead.
Why are binary switch settings not shown any longer in this version? Is this a bug or a feature ?
In the expert interface you can still access the binary switches and these are shown in the interview results as well.
I now installed 2.3.6 and the binary switches are back again.
I experienced with this new update with Philio Roller Shutter Pan08 that in the regular interface you can no longer access binary switches (they are no longer available in the interface, so all scenes, schedules that used to have binary switches of PAN08 are now empty and no longer functional). So you cannot simply turn off/turn on the roller shutters to completely open or close them.
Roller shutters can be multi switched to 0% or 100% instead.
Why are binary switch settings not shown any longer in this version? Is this a bug or a feature ?
In the expert interface you can still access the binary switches and these are shown in the interview results as well.
I now installed 2.3.6 and the binary switches are back again.