[SOLVED] Help updating the firmware after successfully updating the bootloader

Discussions about RaZberry - Z-Wave board for Raspberry computer
Converseallstar95
Posts: 6
Joined: 18 Jan 2020 20:51

[SOLVED] Help updating the firmware after successfully updating the bootloader

Post by Converseallstar95 »

I have a RaZBerry, Pi B3+ and installed the Z-Way.img, When I navigated to the expert Z-Wave UI, I was able to update the bootloader from 5.04 to 8aaa, and it showed that I could update the firmware to 5.07. After I updated the bootlader and rebooted, the 5.07 update was no longer there? I've found many people here updating through terminal, how do I access the terminal through the web UI? Thanks!
Last edited by Converseallstar95 on 27 Jan 2020 13:55, edited 1 time in total.
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Help updating the firmware after successfully updating the bootloader

Post by PoltoS »

Enter token "all" and get more options
Converseallstar95
Posts: 6
Joined: 18 Jan 2020 20:51

Re: Help updating the firmware after successfully updating the bootloader

Post by Converseallstar95 »

Thanks for the help, but nothing changed when I typed all and hit go?
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Help updating the firmware after successfully updating the bootloader

Post by PoltoS »

Your Z-Way us 3.0.x? Your RaZ is 5.07?
Converseallstar95
Posts: 6
Joined: 18 Jan 2020 20:51

Re: Help updating the firmware after successfully updating the bootloader

Post by Converseallstar95 »

Z-Way is 3.0.3 and RaZ last showed 5.04.
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Help updating the firmware after successfully updating the bootloader

Post by PoltoS »

Make sure to update the bootloader first. Does it show you this button? What is proposed?
Converseallstar95
Posts: 6
Joined: 18 Jan 2020 20:51

Re: Help updating the firmware after successfully updating the bootloader

Post by Converseallstar95 »

When I first went to the updating webpage, there was a bootloader update (5.04 to 8aaa) and a firmware update (5.04 to 5.07). After updating the bootloader, the firmware update does not show up.
User avatar
PoltoS
Posts: 7565
Joined: 26 Jan 2011 19:36

Re: Help updating the firmware after successfully updating the bootloader

Post by PoltoS »

Please make sure your firmware CRC is no 8aaa (35498 in decomal in the UI), your Z-Way is 3.0.x, your uuid is not 0x00000000000000 (in that case just power off the full Pi and tunr on again).

The transition file is online:
https://service.z-wave.me/expertui/uzb- ... tml?hw=327
Converseallstar95
Posts: 6
Joined: 18 Jan 2020 20:51

Re: Help updating the firmware after successfully updating the bootloader

Post by Converseallstar95 »

My UUID did have all 0's, so when I unplugged the Pi and plugged it back in, I now see an update for 5.04 to 5.07 and 5.04 to 5.22; thanks!

I upgraded 5.04 > 5.07 > 5.22 > 5.23 > 5.32 > 5.36

Marked as solved! :)
robert
Posts: 16
Joined: 06 Jul 2013 00:42

Re: [SOLVED] Help updating the firmware after successfully updating the bootloader

Post by robert »

In the expert Z-Wave UI, did you go to Network -> Controller Info and then the button Firmware Update?

In my case, I get a Z-Wave Expert UI - ERROR message saying Could not retrieve data from remote server.
I noticed the Access Token looks empty, should something be filled?
Post Reply