Hello all!
I'm wondering if anyone has had experiences with pairing a First Alert Smoke and CO Detector to their network.
I picked one up today, and can successfully pair the device to my network, but unfortunately, the device goes to sleep after 30 seconds, and the interview process doesn't complete.
As an FYI I'm running the v2.0.2 RC that was released on July 16th.
Any help would be appreciated!
First Alert - Smoke and CO Detector
Re: First Alert - Smoke and CO Detector
Same problem here, left it like that for several months now, interview incomplete.
Advice on discussion boards for other controllers was generally to keep trying to exclude / re-include, but it didn't help here. There's an older thread in the device specific area.
Advice on discussion boards for other controllers was generally to keep trying to exclude / re-include, but it didn't help here. There's an older thread in the device specific area.
-
- Posts: 10
- Joined: 25 May 2014 15:39
Re: First Alert - Smoke and CO Detector
Hi, can you share what part of interview is not complete, log file is even better. Indeed this device was never tested with razberry so makes sense to dig into it. I guess we talk about http://products.z-wavealliance.org/products/863
Re: First Alert - Smoke and CO Detector
I'll gladly get you a log! Just let me know where to look and I'll remove and readd the device to my network.
Re: First Alert - Smoke and CO Detector
On the RaspberryPinybble wrote:I'll gladly get you a log! Just let me know where to look and I'll remove and readd the device to my network.
/var/log/z-way-server.log
Re: First Alert - Smoke and CO Detector
According to the Configuration tab for the device under the Expert UI - The interview fails at the Basic Commands section of the interview process.
I was unable to attach a .txt or .log output to this post, so I have included a link to the contents of the z-way-server.log file in a pastebin link here -> http://pastebin.com/m0J4c1RX
I was unable to attach a .txt or .log output to this post, so I have included a link to the contents of the z-way-server.log file in a pastebin link here -> http://pastebin.com/m0J4c1RX
- Attachments
-
- Interview Results
- Screen Shot 2015-07-20 at 7.51.11 PM.png (56.06 KiB) Viewed 12368 times
-
- Configuration Tab
- Screen Shot 2015-07-20 at 7.50.58 PM.png (82.11 KiB) Viewed 12368 times
Last edited by nybble on 21 Jul 2015 02:57, edited 1 time in total.
Re: First Alert - Smoke and CO Detector
Additionally - If I try to force an interview of the device, the device immediately reports that it is in deep sleep and doesn't wake up.
Repeating the "Inclusion" process on the alarm will wake it up, but it fails at the same step of the interview as originally posted above.
Repeating the "Inclusion" process on the alarm will wake it up, but it fails at the same step of the interview as originally posted above.
- Attachments
-
- Forced Interview.
- Screen Shot 2015-07-20 at 7.56.36 PM.png (78.57 KiB) Viewed 12368 times
Re: First Alert - Smoke and CO Detector
Just so we're all on the same page - We're talking about this device. http://products.z-wavealliance.org/products/862christian.paetz wrote:Hi, can you share what part of interview is not complete, log file is even better. Indeed this device was never tested with razberry so makes sense to dig into it. I guess we talk about http://products.z-wavealliance.org/products/863
Same manufacturer, but a slightly different model.
Re: First Alert - Smoke and CO Detector
Hey all! Just giving this a little bump to see if anyone has had a chance to review any of the information I posted!
Thanks again for all your help!
Thanks again for all your help!
Re: First Alert - Smoke and CO Detector
Same here, fails on the 'basic' portion of the interview and all portions can complete.
Log output is:
[2015-08-14 20:06:05.460] [zway] Job 0x13 (Basic Get): Delivered
[2015-08-14 20:06:05.460] [D] [zway] SETDATA devices.61.data.lastPacketInfo.delivered = True
[2015-08-14 20:06:05.460] [D] [zway] SETDATA devices.61.data.lastPacketInfo.packetLength = 5 (0x00000005)
[2015-08-14 20:06:05.461] [D] [zway] SETDATA devices.61.data.lastPacketInfo.deliveryTime = 24 (0x00000018)
[2015-08-14 20:06:05.461] [D] [zway] SETDATA devices.61.data.lastPacketInfo = **********
[2015-08-14 20:06:05.461] [D] [zway] SendData Response with callback 0x4a received: received by recipient
[2015-08-14 20:06:05.461] [D] [zway] SETDATA devices.61.data.lastSend = 150408 (0x00024b88)
[2015-08-14 20:06:05.462] [D] [zway] Job 0x13 (Basic Get): success
[2015-08-14 20:06:05.462] [zway] Removing job: Basic Get
This is with 2.0.1. Manual is at http://www.lowes.com/pdf/First%20Alert% ... tector.pdf.
Log output is:
[2015-08-14 20:06:05.460] [zway] Job 0x13 (Basic Get): Delivered
[2015-08-14 20:06:05.460] [D] [zway] SETDATA devices.61.data.lastPacketInfo.delivered = True
[2015-08-14 20:06:05.460] [D] [zway] SETDATA devices.61.data.lastPacketInfo.packetLength = 5 (0x00000005)
[2015-08-14 20:06:05.461] [D] [zway] SETDATA devices.61.data.lastPacketInfo.deliveryTime = 24 (0x00000018)
[2015-08-14 20:06:05.461] [D] [zway] SETDATA devices.61.data.lastPacketInfo = **********
[2015-08-14 20:06:05.461] [D] [zway] SendData Response with callback 0x4a received: received by recipient
[2015-08-14 20:06:05.461] [D] [zway] SETDATA devices.61.data.lastSend = 150408 (0x00024b88)
[2015-08-14 20:06:05.462] [D] [zway] Job 0x13 (Basic Get): success
[2015-08-14 20:06:05.462] [zway] Removing job: Basic Get
This is with 2.0.1. Manual is at http://www.lowes.com/pdf/First%20Alert% ... tector.pdf.
Last edited by jhmartin on 22 May 2016 05:43, edited 1 time in total.